mail.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements.  See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License.  You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<document>

  <properties>
    <author email="dev.AT.jmeter.DOT.apache.DOT.org">Apache JMeter Project</author>
    <title>Mailing Lists</title>
  </properties>

<body>

<section name="Mailing Lists - Guidelines">

<p>A mailing list is an electronic discussion forum that anyone can
subscribe to. When someone sends an email message to the mailing list,
a copy of that message is broadcast to everyone who is subscribed to
that mailing list. Mailing lists provide a simple and effective
communication mechanism. With potentially thousands of subscribers,
there is a common set of etiquette guidelines that you should observe.
Please keep on reading.
</p>

<p>
Please note that usage of these mailing lists is subject to the
<a href="http://www.apache.org/foundation/public-archives.html">Public Forum Archive Policy</a>.
</p>

<p>
<strong>
      Respect the mailing list type
</strong><br/>
 There are generally two types of lists.
</p>

<p>
<ul>
    <li>
    The "User" lists where you can send questions and comments about
    configuration, setup, usage and other "user" types of questions.
    </li>
    <li>
    The "Developer" lists where you can send questions and
    comments about the actual software source code and general
    "development" types of questions.
    </li>
</ul>
</p>

<p>Some questions are appropriate for posting on both the "user" and
the "developer" lists. In this case, pick one and only one. Do not
cross post.</p>

<p>Asking a configuration question on the developers list is frowned
upon because developers' time is as precious as yours. By contacting
them directly instead of the user base you are abusing resources. In
fact, it is unlikely that you will get a quicker answer, if at
all.</p>

<p>
<strong>
      Join the lists that are appropriate for your discussion.
</strong><br/>
Please make sure that you are joining the list that is appropriate for the
topic or product that you would like to discuss. For example,
please do not join the Regexp mailing list and ask questions about Tomcat.
Instead, you should join the Tomcat User list and ask your questions
there.
</p>

<p>
<strong>
    Ask smart questions.  </strong><br/>

Every volunteer project obtains its strength from the people involved
in it. You are welcome to join any of our mailing lists.  You can
choose to lurk, or actively participate; it's up to you.  The level of
community responsiveness to specific questions is generally directly
proportional to the amount of effort you spend formulating your
question. Eric Raymond and Rick Moen have even written an essay entitled <a
href="http://www.catb.org/~esr/faqs/smart-questions.html">"<b>Asking
Smart Questions</b>"</a> precisely on this topic.  Although somewhat
militant, it is definitely worth reading.<br/>
<b>Note</b>: Please do NOT send your Java problems to the two authors. They welcome feedback on the FAQ's contents, but are simply not a Java help resource. Follow the essay's advice and <a href="http://www.catb.org/~esr/faqs/smart-questions.html#forum">choose your forum</a> carefully.
</p>

<p>
<strong>
    Keep your email short and to the point; use a suitable subject line.
</strong><br/>
If your email is more than about a page of text, chances are that it
won't get read by very many people. It is much better to try to pack a
lot of informative information (see above about asking smart questions)
into as small of an email as possible. If you are replying to a previous
email, it is a good idea to only quote the parts that you are replying
to and to remove the unnecessary bits. This makes it easier for people
to follow a thread as well as making the email archives easier to search
and read.
</p>

<p>
<strong>
    Start a new thread for a new topic
</strong><br/>
When asing a new question, please start a new thread with an appropriate new subject line.
This makes it easier to read, and to find later in the archives.
</p>

<p>
<strong>
    Do your best to ensure that you are not sending HTML or
    "Stylelized" email to the list.
</strong><br/>
If you are using Outlook or Outlook Express or Eudora, chances are that
you are sending HTML email by default. There is usually a setting that
will allow you to send "Plain Text" email. If you are using Microsoft
products to send email, there are several bugs in the software that
prevent you from turning off the sending of HTML email.
</p>

<p>
<strong>
Please don't send attachments or include large chunks of code</strong><br/>
Attachments can be difficult to read and are rarely needed by all recipients.
Some mailing lists are set up to drop them.
If you need to send more than a few lines of code, ask first.
Note that code is often mangled by word-wrapping, so it is better to provide a link to a downloadable file.
If necessary, arrange with the person(s) responding to the posting how best to give access to the data,
should it prove necessary.
</p>

<p>
<strong>
    Watch where you are sending email.
</strong><br/>
The majority of our mailing lists have set the Reply-To to go back to the
list. That means that when you Reply to a message, it will go to the list
and not to the original author directly. The reason is because it helps
facilitate discussion on the list for everyone to benefit from. Be careful
of this as sometimes you may intend to reply to a message directly to someone
instead of the entire list.
<em>
The appropriate contents of the Reply-To header is an age-old debate that
should not be brought up on the mailing lists.  You can
examine opposing points of view
<a href="http://www.unicom.com/pw/reply-to-harmful.html">condemning</a>
our convention and
<a href="http://www.metasystema.net/essays/reply-to.mhtml">
condoning</a>
it.  Bringing this up for debate on a mailing list will add nothing
new and is considered off-topic.
</em>
</p>

<p>
<strong>
    Do not cross post messages.
</strong><br/>
In other words, pick a mailing list and send your messages to that mailing
list only. Do not send your messages to multiple mailing lists. The reason is
that people may be subscribed to one list and not to the other. Therefore,
some people will only see part of the conversation.
</p>
</section>

<section name="Conclusion">
<p>
<strong>Now that you have read the guidelines above</strong>, <a
href="./mail2.html"><strong>here</strong></a> is the page that gives
you a listing of the different mailing lists that you can join. If you
managed to find this without reading the above information, chances
are you will be sent back here. You might as well read it now and save
yourself the embarrassment.
</p>
</section>

</body>
</document>
	<?xml version="1.0" encoding="ISO-8859-1"?>
	<!--
	Licensed to the Apache Software Foundation (ASF) under one or more
	contributor license agreements. See the NOTICE file distributed with
	this work for additional information regarding copyright ownership.
	The ASF licenses this file to You under the Apache License, Version 2.0
	(the "License"); you may not use this file except in compliance with
	the License. You may obtain a copy of the License at

	http://www.apache.org/licenses/LICENSE-2.0

	Unless required by applicable law or agreed to in writing, software
	distributed under the License is distributed on an "AS IS" BASIS,
	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	See the License for the specific language governing permissions and
	limitations under the License.
	-->
	<document>

	<properties>
	<author email="dev.AT.jmeter.DOT.apache.DOT.org">Apache JMeter Project</author>
	<title>Mailing Lists</title>
	</properties>

	<body>

	<section name="Mailing Lists - Guidelines">

	<p>A mailing list is an electronic discussion forum that anyone can
	subscribe to. When someone sends an email message to the mailing list,
	a copy of that message is broadcast to everyone who is subscribed to
	that mailing list. Mailing lists provide a simple and effective
	communication mechanism. With potentially thousands of subscribers,
	there is a common set of etiquette guidelines that you should observe.
	Please keep on reading.
	</p>

	<p>
	Please note that usage of these mailing lists is subject to the
	<a href="http://www.apache.org/foundation/public-archives.html">Public Forum Archive Policy</a>.
	</p>

	<p>
	<strong>
	Respect the mailing list type
	</strong><br/>
	There are generally two types of lists.
	</p>

	<p>
	<ul>
	<li>
	The "User" lists where you can send questions and comments about
	configuration, setup, usage and other "user" types of questions.
	</li>
	<li>
	The "Developer" lists where you can send questions and
	comments about the actual software source code and general
	"development" types of questions.
	</li>
	</ul>
	</p>

	<p>Some questions are appropriate for posting on both the "user" and
	the "developer" lists. In this case, pick one and only one. Do not
	cross post.</p>

	<p>Asking a configuration question on the developers list is frowned
	upon because developers' time is as precious as yours. By contacting
	them directly instead of the user base you are abusing resources. In
	fact, it is unlikely that you will get a quicker answer, if at
	all.</p>

	<p>
	<strong>
	Join the lists that are appropriate for your discussion.
	</strong><br/>
	Please make sure that you are joining the list that is appropriate for the
	topic or product that you would like to discuss. For example,
	please do not join the Regexp mailing list and ask questions about Tomcat.
	Instead, you should join the Tomcat User list and ask your questions
	there.
	</p>

	<p>
	<strong>
	Ask smart questions. </strong><br/>

	Every volunteer project obtains its strength from the people involved
	in it. You are welcome to join any of our mailing lists. You can
	choose to lurk, or actively participate; it's up to you. The level of
	community responsiveness to specific questions is generally directly
	proportional to the amount of effort you spend formulating your
	question. Eric Raymond and Rick Moen have even written an essay entitled <a
	href="http://www.catb.org/~esr/faqs/smart-questions.html">"<b>Asking
	Smart Questions</b>"</a> precisely on this topic. Although somewhat
	militant, it is definitely worth reading.<br/>
	<b>Note</b>: Please do NOT send your Java problems to the two authors. They welcome feedback on the FAQ's contents, but are simply not a Java help resource. Follow the essay's advice and <a href="http://www.catb.org/~esr/faqs/smart-questions.html#forum">choose your forum</a> carefully.
	</p>

	<p>
	<strong>
	Keep your email short and to the point; use a suitable subject line.
	</strong><br/>
	If your email is more than about a page of text, chances are that it
	won't get read by very many people. It is much better to try to pack a
	lot of informative information (see above about asking smart questions)
	into as small of an email as possible. If you are replying to a previous
	email, it is a good idea to only quote the parts that you are replying
	to and to remove the unnecessary bits. This makes it easier for people
	to follow a thread as well as making the email archives easier to search
	and read.
	</p>

	<p>
	<strong>
	Start a new thread for a new topic
	</strong><br/>
	When asing a new question, please start a new thread with an appropriate new subject line.
	This makes it easier to read, and to find later in the archives.
	</p>

	<p>
	<strong>
	Do your best to ensure that you are not sending HTML or
	"Stylelized" email to the list.
	</strong><br/>
	If you are using Outlook or Outlook Express or Eudora, chances are that
	you are sending HTML email by default. There is usually a setting that
	will allow you to send "Plain Text" email. If you are using Microsoft
	products to send email, there are several bugs in the software that
	prevent you from turning off the sending of HTML email.
	</p>

	<p>
	<strong>
	Please don't send attachments or include large chunks of code</strong><br/>
	Attachments can be difficult to read and are rarely needed by all recipients.
	Some mailing lists are set up to drop them.
	If you need to send more than a few lines of code, ask first.
	Note that code is often mangled by word-wrapping, so it is better to provide a link to a downloadable file.
	If necessary, arrange with the person(s) responding to the posting how best to give access to the data,
	should it prove necessary.
	</p>

	<p>
	<strong>
	Watch where you are sending email.
	</strong><br/>
	The majority of our mailing lists have set the Reply-To to go back to the
	list. That means that when you Reply to a message, it will go to the list
	and not to the original author directly. The reason is because it helps
	facilitate discussion on the list for everyone to benefit from. Be careful
	of this as sometimes you may intend to reply to a message directly to someone
	instead of the entire list.
	<em>
	The appropriate contents of the Reply-To header is an age-old debate that
	should not be brought up on the mailing lists. You can
	examine opposing points of view
	<a href="http://www.unicom.com/pw/reply-to-harmful.html">condemning</a>
	our convention and
	<a href="http://www.metasystema.net/essays/reply-to.mhtml">
	condoning</a>
	it. Bringing this up for debate on a mailing list will add nothing
	new and is considered off-topic.
	</em>
	</p>

	<p>
	<strong>
	Do not cross post messages.
	</strong><br/>
	In other words, pick a mailing list and send your messages to that mailing
	list only. Do not send your messages to multiple mailing lists. The reason is
	that people may be subscribed to one list and not to the other. Therefore,
	some people will only see part of the conversation.
	</p>
	</section>

	<section name="Conclusion">
	<p>
	<strong>Now that you have read the guidelines above</strong>, <a
	href="./mail2.html"><strong>here</strong></a> is the page that gives
	you a listing of the different mailing lists that you can join. If you
	managed to find this without reading the above information, chances
	are you will be sent back here. You might as well read it now and save
	yourself the embarrassment.
	</p>
	</section>

	</body>
	</document>