Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Project28JMeter/ApacheJmeter/xdocs/usermanual/build-ldap-test-plan.xml

Go to file
 
 
Cannot retrieve contributors at this time
152 lines (127 sloc) 6.88 KB
Raw Blame
Open in GitHub Desktop
<?xml version="1.0"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!DOCTYPE document
[
<!ENTITY sect-num '9a'>
]>
<document prev="build-ftp-test-plan.html" next="build-ldapext-test-plan.html" id="$Id: build-ldap-test-plan.xml 1175606 2011-09-25 22:28:22Z sebb $">
<properties>
<title>User's Manual: Building an LDAP Test Plan</title>
</properties>
<body>
<section name="&sect-num;. Building an LDAP Test Plan" anchor="building">
<p>In this section, you will learn how to create a basic Test Plan to test an LDAP server.
You will create four users that send requests for four tests on the LDAP server.Also, you will tell
the users to run their tests twice. So, the total number of requests is (4 users) x (4 requests) x
repeat 2 times) = 32 LDAP requests. To construct the Test Plan, you will use the following elements:
<a href="test_plan.html#thread_group">Thread Group</a>,
<complink name="LDAP Request"/>,
<complink name="LDAP Request Defaults"/>, and
<complink name="View Results in Table"/>
.</p>
<p>This example assumes that the LDAP Server is installed in your Local machine.</p>
</section>
<section name="&sect-num;.1 Adding Users" anchor="adding_users">
<p>The first step you want to do with every JMeter Test Plan is to add a Thread Group element.
The Thread Group tells JMeter the number of users you want to simulate, how often the users should send
requests, and the how many requests they should send.</p>
<p>Go ahead and add the ThreadGroup element by first selecting the Test Plan, clicking your
right mouse button to get the Add menu, and then select Add-->ThreadGroup. You should now see the
Thread Group element under Test Plan. If you do not see the element, then "expand" the Test Plan tree by
clicking on the Test Plan element.
<figure image="ldaptest/threadgroup.png">
Figure &sect-num;.1. Thread Group with Default Values</figure>
</p>
</section>
<section name="&sect-num;.2 Adding Login Config Element" anchor="add_login">
<p>Begin by selecting the Siptech Users element. Click your right mouse
button to get the Add menu, and then select Add --> Config Element --> Login Config Element.
Then, select this new element to view its Control Panel.</p>
<p>Like most JMeter elements, the Login Config Element Control Panel has a name
field that you can modify. In this example, leave this field with the default value.</p>
<figure image="ldaptest/login-config-element.png">
Figure &sect-num;.2 Login Config Element for our Test Plan</figure>
<note><p>Enter Username field to "your Server Username",<br/>
The password field to "your Server Passowrd"</p>
<p>These values are default for the LDAP Requests.</p></note>
</section>
<section name="&sect-num;.3 Adding LDAP Request Defaults" anchor="add_defaults">
<p>Begin by selecting the Siptech Users element. Click your right mouse button
to get the Add menu, and then select Add --> Config Element -->LDAP Request Defaults. Then,
select this new element to view its Control Panel.</p>
<p>Like most JMeter elements, the LDAP Request Defaults Control Panel has a name
field that you can modify. In this example, leave this field with the default value.</p>
<figure image="ldaptest/requestdefaults.png">
Figure &sect-num;.3 LDAP Defaults for our Test Plan</figure>
<note>Enter DN field to "your Server Root Dn".<br/>
Enter LDAP Server's Servername field to "localhost".<br/>
The port to 389.<br/>
These values are default for the LDAP Requests.</note>
</section>
<section name="&sect-num;.4 Adding LDAP Requests" anchor="add_requests">
<p>In our Test Plan, we need to make four LDAP requests.</p>
<ol>
<li>Inbuilt Add Test</li>
<li>Inbuilt Modify Test</li>
<li>Inbuilt Delete Test</li>
<li>Inbuilt Search Test</li>
</ol>
<p>JMeter sends requests in the order that you add them to the tree.
Start by adding the first LDAP Request to the Siptech Users element (Add -->
Sampler --> LDAP Request). Then, select the LDAP Request element in the tree
and edit the following properties</p>
<ol>
<li>Change the Name to "Inbuilt-Add Test".</li>
<li>Select the Add test Radio button</li>
</ol>
<figure image="ldaptest/add.png">
Figure &sect-num;.4.1 LDAP Request for Inbuilt Add test</figure>
<p>You do not have to set the Server Name field, port field, Username, Password
and DN because you already specified this value in the Login Config Element and
LDAP Request Defaults.</p>
<p>Next, add the second LDAP Request and edit the following
properties</p>
<ol>
<li>Change the Name to "Inbuilt-Modify Test".</li>
<li>Select the Modify test Radio button</li>
</ol>
Next, add the Third LDAP Request and edit the following properties
<figure image="ldaptest/modify.png">
Figure &sect-num;.4.2 LDAP Request for Inbuilt Modify test</figure>
<ol>
<li>Change the Name to "Inbuilt-Delete Test".</li>
<li>Select the Delete test Radio button</li>
</ol>
Next, add the fourth LDAP Request and edit the following properties
<figure image="ldaptest/delete.png">
Figure &sect-num;.4.3 LDAP Request for Inbuilt Delete test</figure>
<ol>
<li>Change the Name to "Inbuilt-Search Test".</li>
<li>Select the Search test Radio button</li>
</ol>
<figure image="ldaptest/search.png">
Figure &sect-num;.4.4 LDAP Request for Inbuilt Search test</figure>
</section>
<section name="&sect-num;.5 Adding a Listener to View/Store the Test Results" anchor="add_listener">
<p>The final element you need to add to your Test Plan is a Listener.
This element is responsible for storing all of the results of your LDAP
requests in a file and presenting a visual model of the data.Select the Siptech
Users element and add a View Results in Table (Add --> Listener -->View Results in Table)</p>
<figure image="ldaptest/viewtable.png">
Figure &sect-num;.5 View result in Table Listener</figure>
</section>
</body>
</document>