sig-alternate-sample.tex

% This is "sig-alternate.tex" V2.1 April 2013
% This file should be compiled with V2.5 of "sig-alternate.cls" May 2012
%
% This example file demonstrates the use of the 'sig-alternate.cls'
% V2.5 LaTeX2e document class file. It is for those submitting
% articles to ACM Conference Proceedings WHO DO NOT WISH TO
% STRICTLY ADHERE TO THE SIGS (PUBS-BOARD-ENDORSED) STYLE.
% The 'sig-alternate.cls' file will produce a similar-looking,
% albeit, 'tighter' paper resulting in, invariably, fewer pages.
%
% ----------------------------------------------------------------------------------------------------------------
% This .tex file (and associated .cls V2.5) produces:
%       1) The Permission Statement
%       2) The Conference (location) Info information
%       3) The Copyright Line with ACM data
%       4) NO page numbers
%
% as against the acm_proc_article-sp.cls file which
% DOES NOT produce 1) thru' 3) above.
%
% Using 'sig-alternate.cls' you have control, however, from within
% the source .tex file, over both the CopyrightYear
% (defaulted to 200X) and the ACM Copyright Data
% (defaulted to X-XXXXX-XX-X/XX/XX).
% e.g.
% \CopyrightYear{2007} will cause 2007 to appear in the copyright line.
% \crdata{0-12345-67-8/90/12} will cause 0-12345-67-8/90/12 to appear in the copyright line.
%
% ---------------------------------------------------------------------------------------------------------------
% This .tex source is an example which *does* use
% the .bib file (from which the .bbl file % is produced).
% REMEMBER HOWEVER: After having produced the .bbl file,
% and prior to final submission, you *NEED* to 'insert'
% your .bbl file into your source .tex file so as to provide
% ONE 'self-contained' source file.
%
% ================= IF YOU HAVE QUESTIONS =======================
% Questions regarding the SIGS styles, SIGS policies and
% procedures, Conferences etc. should be sent to
% Adrienne Griscti (griscti@acm.org)
%
% Technical questions _only_ to
% Gerald Murray (murray@hq.acm.org)
% ===============================================================
%
% For tracking purposes - this is V2.0 - May 2012

\documentclass{sig-alternate-05-2015}


\begin{document}

% Copyright
\setcopyright{acmcopyright}
%\setcopyright{acmlicensed}
%\setcopyright{rightsretained}
%\setcopyright{usgov}
%\setcopyright{usgovmixed}
%\setcopyright{cagov}
%\setcopyright{cagovmixed}


% DOI
%\doi{10.475/123_4}

% ISBN
%\isbn{123-4567-24-567/08/06}

%Conference
%\conferenceinfo{PLDI '13}{June 16--19, 2013, Seattle, WA, USA}

%\acmPrice{\$15.00}

%
% --- Author Metadata here ---
\conferenceinfo{WOODSTOCK}{'97 El Paso, Texas USA}
%\CopyrightYear{2007} % Allows default copyright year (20XX) to be over-ridden - IF NEED BE.
%\crdata{0-12345-67-8/90/01}  % Allows default copyright data (0-89791-88-6/97/05) to be over-ridden - IF NEED BE.
% --- End of Author Metadata ---

\title{Framework for Implementing Attacker Based Embedded Systems Security Metrics}
%\subtitle{[Extended Abstract]
%\titlenote{A full version of this paper is available as
%\textit{Author's Guide to Preparing ACM SIG Proceedings Using
%\LaTeX$2_\epsilon$\ and BibTeX} at
%\texttt{www.acm.org/eaddress.htm}}}
%
% You need the command \numberofauthors to handle the 'placement
% and alignment' of the authors beneath the title.
%
% For aesthetic reasons, we recommend 'three authors at a time'
% i.e. three 'name/affiliation blocks' be placed beneath the title.
%
% NOTE: You are NOT restricted in how many 'rows' of
% "name/affiliations" may appear. We just ask that you restrict
% the number of 'columns' to three.
%
% Because of the available 'opening page real-estate'
% we ask you to refrain from putting more than six authors
% (two rows with three columns) beneath the article title.
% More than six makes the first-page appear very cluttered indeed.
%
% Use the \alignauthor commands to handle the names
% and affiliations for an 'aesthetic maximum' of six authors.
% Add names, affiliations, addresses for
% the seventh etc. author(s) as the argument for the
% \additionalauthors command.
% These 'additional authors' will be output/set for you
% without further effort on your part as the last section in
% the body of your article BEFORE References or any Appendices.

\numberofauthors{2} %  in this sample file, there are a *total*
% of EIGHT authors. SIX appear on the 'first-page' (for formatting
% reasons) and the remaining two appear in the \additionalauthors section.
%
\author{
% You can go ahead and credit any number of authors here,
% e.g. one 'row of three' or two rows (consisting of one row of three
% and a second row of one, two or three).
%
% The command \alignauthor (no curly braces needed) should
% precede each author name, affiliation/snail-mail address and
% e-mail address. Additionally, tag each line of
% affiliation/address with \affaddr, and tag the
% e-mail address with \email.
%
% 1st. author
\alignauthor
Paul Wortman\\
       \affaddr{University of Connecticut}\\
%       \affaddr{1932 Wallamaloo Lane}\\
%       \affaddr{Wallamaloo, New Zealand}\\
       \email{paul.wortman@uconn.edu}
% 2nd. author
\alignauthor
John Chandy\\
       \affaddr{University of Connecticut}\\
%       \affaddr{P.O. Box 1212}\\
%       \affaddr{Dublin, Ohio 43017-6221}\\
       \email{john.chandy@uconn.edu}
% 3rd. author
%\alignauthor Lars Th{\o}rv{\"a}ld\titlenote{This author is the
%one who did all the really hard work.}\\
%       \affaddr{The Th{\o}rv{\"a}ld Group}\\
%       \affaddr{1 Th{\o}rv{\"a}ld Circle}\\
%       \affaddr{Hekla, Iceland}\\
%       \email{larst@affiliation.org}
%\and  % use '\and' if you need 'another row' of author names
%% 4th. author
%\alignauthor Lawrence P. Leipuner\\
%       \affaddr{Brookhaven Laboratories}\\
%       \affaddr{Brookhaven National Lab}\\
%       \affaddr{P.O. Box 5000}\\
%       \email{lleipuner@researchlabs.org}
%% 5th. author
%\alignauthor Sean Fogarty\\
%       \affaddr{NASA Ames Research Center}\\
%       \affaddr{Moffett Field}\\
%       \affaddr{California 94035}\\
%       \email{fogartys@amesres.org}
%% 6th. author
%\alignauthor Charles Palmer\\
%       \affaddr{Palmer Research Laboratories}\\
%       \affaddr{8600 Datapoint Drive}\\
%       \affaddr{San Antonio, Texas 78229}\\
%       \email{cpalmer@prl.com}
}
% There's nothing stopping you putting the seventh, eighth, etc.
% author on the opening page (as the 'third row') but we ask,
% for aesthetic reasons that you place these 'additional authors'
% in the \additional authors block, viz.
%\additionalauthors{Additional authors: John Smith (The Th{\o}rv{\"a}ld Group,
%email: {\texttt{jsmith@affiliation.org}}) and Julius P.~Kumquat
%(The Kumquat Consortium, email: {\texttt{jpkumquat@consortium.net}}).}
%\date{30 July 1999}
% Just remember to make sure that the TOTAL number of authors
% is the number that will appear on the first page PLUS the
% number that will appear in the \additionalauthors section.

\maketitle
\begin{abstract}
This paper provides a framework by which developers can implement attacker based embedded system security metrics.  Through using this framework, one can not only design better embedded system security, but can also identify and correct any potential issues early on in the development life-cycle.
\end{abstract}


%
% The code below should be generated by the tool at
% http://dl.acm.org/ccs.cfm
% Please copy and paste the code instead of the example below. 
%
\begin{CCSXML}
<ccs2012>
 <concept>
  <concept_id>10010520.10010553.10010562</concept_id>
  <concept_desc>Computer systems organization~Embedded systems</concept_desc>
  <concept_significance>500</concept_significance>
 </concept>
 <concept>
  <concept_id>10010520.10010575.10010755</concept_id>
  <concept_desc>Computer systems organization~Redundancy</concept_desc>
  <concept_significance>300</concept_significance>
 </concept>
 <concept>
  <concept_id>10010520.10010553.10010554</concept_id>
  <concept_desc>Computer systems organization~Robotics</concept_desc>
  <concept_significance>100</concept_significance>
 </concept>
 <concept>
  <concept_id>10003033.10003083.10003095</concept_id>
  <concept_desc>Networks~Network reliability</concept_desc>
  <concept_significance>100</concept_significance>
 </concept>
</ccs2012>  
\end{CCSXML}

\ccsdesc[500]{Computer systems organization~Embedded systems}
\ccsdesc[300]{Computer systems organization~Redundancy}
\ccsdesc{Computer systems organization~Robotics}
\ccsdesc[100]{Networks~Network reliability}


%
% End generated code
%

%
%  Use this command to print the description
%
\printccsdesc

% We no longer use \terms command
%\terms{Theory}

\keywords{Embedded Systems Security; Security Metrics; Threat Modeling}

\section{Introduction}
What are the security concerns of embedded systems?  How do the constraints of a system play into these issues?
\begin{itemize}
	\item Introduce new Security Design Framework
	\item Emphasis importance of mapping function
\end{itemize}

\section{Related Work}
Related work in the field:
\begin{itemize}
	\item System Modeling
	\begin{itemize}
		\item AADL
	\end{itemize}
	\item Security Modeling
	\item Metrics of Security
\end{itemize}

\section{General System Modeling}
\begin{itemize}
	\item Traditional Concerns
	\item Traditional Measurements of Costs
\end{itemize}

\section{Defining Risk}
\begin{itemize}
	\item Traditional View of Risk
	\item How to Define Risk in Security
	\begin{itemize}
		\item Need to Define Risk
	\end{itemize}
	\item Show Math of How to Calculate Risk for a Given System
\end{itemize}

\section{Design Oriented Examination of Risk}
\begin{itemize}
	\item Estimation of Attack Risk Behavior
	\item Definition of Security Metric
	\item Present Security Risk Equation Along with Constraints
	\begin{itemize}
		\item Probability of Attack Must be Worth the Cost of the Attack
		\item Constraint Calculation to Determine the `Tipping Point'
	\end{itemize}
\end{itemize}

\section{Scenario Examination}
\begin{itemize}
	\item Give Simple Example of Wireless Transmitter System
	\item Show How Metric Works with Traditional Cost Calculations
	\item Comparison of Impact as a Function of Security Risk for Design
\end{itemize}

\section{Modeling an Attacker}
Talk about modeling an attacker:
\begin{itemize}
	\item What are the Considerations from an Attacker's Standpoint?
	\item what are the `calculations' being made by an attacker?
	\begin{itemize}
		\item Attack Cost
		\item Value of Information
	\end{itemize}
\end{itemize}

\section{Expanding Considerations}
\begin{itemize}
	\item Need to Account for Minute Costs Incurred by Physical Properties (e.g. heat, cooling, energy, time)
	\item User Risk Type
	\item Problem of `Relatively Deterministic'
\end{itemize}

\section{Conclusion}
\begin{itemize}
	\item Presented New Security Modeling Framework
	\item Need for Development of Standards and Practice Documentation for Security and Metrics
	\begin{itemize}
		\item Allows More Efficient Verification
	\end{itemize}
	\item Design of Automated Tools and Better Translation of Language Between Different Aspects of the Security Framework Model
\end{itemize}
%\balancecolumns % GM June 2007
% That's all folks!
\end{document}