Skip to content
Fetching contributors…
Cannot retrieve contributors at this time
576 lines (450 sloc) 20.4 KB
 %% bare_conf.tex %% V1.4b %% 2015/08/26 %% by Michael Shell %% See: %% http://www.michaelshell.org/ %% for current contact information. %% %% This is a skeleton file demonstrating the use of IEEEtran.cls %% (requires IEEEtran.cls version 1.8b or later) with an IEEE %% conference paper. %% %% Support sites: %% http://www.michaelshell.org/tex/ieeetran/ %% http://www.ctan.org/pkg/ieeetran %% and %% http://www.ieee.org/ %%************************************************************************* %% Legal Notice: %% This code is offered as-is without any warranty either expressed or %% implied; without even the implied warranty of MERCHANTABILITY or %% FITNESS FOR A PARTICULAR PURPOSE! %% User assumes all risk. %% In no event shall the IEEE or any contributor to this code be liable for %% any damages or losses, including, but not limited to, incidental, %% consequential, or any other damages, resulting from the use or misuse %% of any information contained here. %% %% All comments are the opinions of their respective authors and are not %% necessarily endorsed by the IEEE. %% %% This work is distributed under the LaTeX Project Public License (LPPL) %% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, %% distributed and modified. A copy of the LPPL, version 1.3, is included %% in the base LaTeX documentation of all distributions of LaTeX released %% 2003/12/01 or later. %% Retain all contribution notices and credits. %% ** Modified files should be clearly indicated as such, including ** %% ** renaming them and changing author support contact information. ** %%************************************************************************* % *** Authors should verify (and, if needed, correct) their LaTeX system *** % *** with the testflow diagnostic prior to trusting their LaTeX platform *** % *** with production work. The IEEE's font choices and paper sizes can *** % *** trigger bugs that do not appear when using other class files. *** *** % The testflow support page is at: % http://www.michaelshell.org/tex/testflow/ \documentclass[conference]{IEEEtran} % Some Computer Society conferences also require the compsoc mode option, % but others use the standard conference format. % % If IEEEtran.cls has not been installed into the LaTeX system files, % manually specify the path to it like: % \documentclass[conference]{../sty/IEEEtran} % Some very useful LaTeX packages include: % (uncomment the ones you want to load) % *** MISC UTILITY PACKAGES *** % %\usepackage{ifpdf} % Heiko Oberdiek's ifpdf.sty is very useful if you need conditional % compilation based on whether the output is pdf or dvi. % usage: % \ifpdf % % pdf code % \else % % dvi code % \fi % The latest version of ifpdf.sty can be obtained from: % http://www.ctan.org/pkg/ifpdf % Also, note that IEEEtran.cls V1.7 and later provides a builtin % \ifCLASSINFOpdf conditional that works the same way. % When switching from latex to pdflatex and vice-versa, the compiler may % have to be run twice to clear warning/error messages. % *** CITATION PACKAGES *** % %\usepackage{cite} % cite.sty was written by Donald Arseneau % V1.6 and later of IEEEtran pre-defines the format of the cite.sty package % \cite{} output to follow that of the IEEE. Loading the cite package will % result in citation numbers being automatically sorted and properly % "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using % cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's % \cite will automatically add leading space, if needed. Use cite.sty's % noadjust option (cite.sty V3.8 and later) if you want to turn this off % such as if a citation ever needs to be enclosed in parenthesis. % cite.sty is already installed on most LaTeX systems. Be sure and use % version 5.0 (2009-03-20) and later if using hyperref.sty. % The latest version can be obtained at: % http://www.ctan.org/pkg/cite % The documentation is contained in the cite.sty file itself. % *** GRAPHICS RELATED PACKAGES *** % \ifCLASSINFOpdf % \usepackage[pdftex]{graphicx} % declare the path(s) where your graphic files are % \graphicspath{{../pdf/}{../jpeg/}} % and their extensions so you won't have to specify these with % every instance of \includegraphics % \DeclareGraphicsExtensions{.pdf,.jpeg,.png} \else % or other class option (dvipsone, dvipdf, if not using dvips). graphicx % will default to the driver specified in the system graphics.cfg if no % driver is specified. % \usepackage[dvips]{graphicx} % declare the path(s) where your graphic files are % \graphicspath{{../eps/}} % and their extensions so you won't have to specify these with % every instance of \includegraphics % \DeclareGraphicsExtensions{.eps} \fi % graphicx was written by David Carlisle and Sebastian Rahtz. It is % required if you want graphics, photos, etc. graphicx.sty is already % installed on most LaTeX systems. The latest version and documentation % can be obtained at: % http://www.ctan.org/pkg/graphicx % Another good source of documentation is "Using Imported Graphics in % LaTeX2e" by Keith Reckdahl which can be found at: % http://www.ctan.org/pkg/epslatex % % latex, and pdflatex in dvi mode, support graphics in encapsulated % postscript (.eps) format. pdflatex in pdf mode supports graphics % in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure % that all non-photo figures use a vector format (.eps, .pdf, .mps) and % not a bitmapped formats (.jpeg, .png). The IEEE frowns on bitmapped formats % which can result in "jaggedy"/blurry rendering of lines and letters as % well as large increases in file sizes. % % You can find documentation about the pdfTeX application at: % http://www.tug.org/applications/pdftex % *** MATH PACKAGES *** % %\usepackage{amsmath} % A popular package from the American Mathematical Society that provides % many useful and powerful commands for dealing with mathematics. % % Note that the amsmath package sets \interdisplaylinepenalty to 10000 % thus preventing page breaks from occurring within multiline equations. Use: %\interdisplaylinepenalty=2500 % after loading amsmath to restore such page breaks as IEEEtran.cls normally % does. amsmath.sty is already installed on most LaTeX systems. The latest % version and documentation can be obtained at: % http://www.ctan.org/pkg/amsmath % *** SPECIALIZED LIST PACKAGES *** % %\usepackage{algorithmic} % algorithmic.sty was written by Peter Williams and Rogerio Brito. % This package provides an algorithmic environment fo describing algorithms. % You can use the algorithmic environment in-text or within a figure % environment to provide for a floating algorithm. Do NOT use the algorithm % floating environment provided by algorithm.sty (by the same authors) or % algorithm2e.sty (by Christophe Fiorio) as the IEEE does not use dedicated % algorithm float types and packages that provide these will not provide % correct IEEE style captions. The latest version and documentation of % algorithmic.sty can be obtained at: % http://www.ctan.org/pkg/algorithms % Also of interest may be the (relatively newer and more customizable) % algorithmicx.sty package by Szasz Janos: % http://www.ctan.org/pkg/algorithmicx % *** ALIGNMENT PACKAGES *** % %\usepackage{array} % Frank Mittelbach's and David Carlisle's array.sty patches and improves % the standard LaTeX2e array and tabular environments to provide better % appearance and additional user controls. As the default LaTeX2e table % generation code is lacking to the point of almost being broken with % respect to the quality of the end results, all users are strongly % advised to use an enhanced (at the very least that provided by array.sty) % set of table tools. array.sty is already installed on most systems. The % latest version and documentation can be obtained at: % http://www.ctan.org/pkg/array % IEEEtran contains the IEEEeqnarray family of commands that can be used to % generate multiline equations as well as matrices, tables, etc., of high % quality. % *** SUBFIGURE PACKAGES *** %\ifCLASSOPTIONcompsoc % \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig} %\else % \usepackage[caption=false,font=footnotesize]{subfig} %\fi % subfig.sty, written by Steven Douglas Cochran, is the modern replacement % for subfigure.sty, the latter of which is no longer maintained and is % incompatible with some LaTeX packages including fixltx2e. However, % subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty % which will override IEEEtran.cls' handling of captions and this will result % in non-IEEE style figure/table captions. To prevent this problem, be sure % and invoke subfig.sty's "caption=false" package option (available since % subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEEtran.cls % handling of captions. % Note that the Computer Society format requires a larger sans serif font % than the serif footnote size font used in traditional IEEE formatting % and thus the need to invoke different subfig.sty package options depending % on whether compsoc mode has been enabled. % % The latest version and documentation of subfig.sty can be obtained at: % http://www.ctan.org/pkg/subfig % *** FLOAT PACKAGES *** % %\usepackage{fixltx2e} % fixltx2e, the successor to the earlier fix2col.sty, was written by % Frank Mittelbach and David Carlisle. This package corrects a few problems % in the LaTeX2e kernel, the most notable of which is that in current % LaTeX2e releases, the ordering of single and double column floats is not % guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a % single column figure to be placed prior to an earlier double column % figure. % Be aware that LaTeX2e kernels dated 2015 and later have fixltx2e.sty's % corrections already built into the system in which case a warning will % be issued if an attempt is made to load fixltx2e.sty as it is no longer % needed. % The latest version and documentation can be found at: % http://www.ctan.org/pkg/fixltx2e %\usepackage{stfloats} % stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e % the ability to do double column floats at the bottom of the page as well % as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in % LaTeX2e). It also provides a command: %\fnbelowfloat % to enable the placement of footnotes below bottom floats (the standard % LaTeX2e kernel puts them above bottom floats). This is an invasive package % which rewrites many portions of the LaTeX2e float routines. It may not work % with other packages that modify the LaTeX2e float routines. The latest % version and documentation can be obtained at: % http://www.ctan.org/pkg/stfloats % Do not use the stfloats baselinefloat ability as the IEEE does not allow % \baselineskip to stretch. Authors submitting work to the IEEE should note % that the IEEE rarely uses double column equations and that authors should try % to avoid such use. Do not be tempted to use the cuted.sty or midfloat.sty % packages (also by Sigitas Tolusis) as the IEEE does not format its papers in % such ways. % Do not attempt to use stfloats with fixltx2e as they are incompatible. % Instead, use Morten Hogholm'a dblfloatfix which combines the features % of both fixltx2e and stfloats: % % \usepackage{dblfloatfix} % The latest version can be found at: % http://www.ctan.org/pkg/dblfloatfix % *** PDF, URL AND HYPERLINK PACKAGES *** % %\usepackage{url} % url.sty was written by Donald Arseneau. It provides better support for % handling and breaking URLs. url.sty is already installed on most LaTeX % systems. The latest version and documentation can be obtained at: % http://www.ctan.org/pkg/url % Basically, \url{my_url_here}. % *** Do not adjust lengths that control margins, column widths, etc. *** % *** Do not use packages that alter fonts (such as pslatex). *** % There should be no need to do such things with IEEEtran.cls V1.6 and later. % (Unless specifically asked to do so by the journal or conference you plan % to submit to, of course. ) % correct bad hyphenation here \hyphenation{op-tical net-works semi-conduc-tor} \begin{document} % % paper title % Titles are generally capitalized except for words such as a, an, and, as, % at, but, by, for, in, nor, of, on, or, the, to and up, which are usually % not capitalized unless they are the first or last word of the title. % Linebreaks \\ can be used within to get better formatting as desired. % Do not put math or special symbols in the title. \title{Bare Demo of IEEEtran.cls\\ for IEEE Conferences} % author names and affiliations % use a multiple column layout for up to three different % affiliations \author{\IEEEauthorblockN{Michael Shell} \IEEEauthorblockA{School of Electrical and\\Computer Engineering\\ Georgia Institute of Technology\\ Atlanta, Georgia 30332--0250\\ Email: http://www.michaelshell.org/contact.html} \and \IEEEauthorblockN{Homer Simpson} \IEEEauthorblockA{Twentieth Century Fox\\ Springfield, USA\\ Email: homer@thesimpsons.com} \and \IEEEauthorblockN{James Kirk\\ and Montgomery Scott} \IEEEauthorblockA{Starfleet Academy\\ San Francisco, California 96678--2391\\ Telephone: (800) 555--1212\\ Fax: (888) 555--1212}} % conference papers do not typically use \thanks and this command % is locked out in conference mode. If really needed, such as for % the acknowledgment of grants, issue a \IEEEoverridecommandlockouts % after \documentclass % for over three affiliations, or if they all won't fit within the width % of the page, use this alternative format: % %\author{\IEEEauthorblockN{Michael Shell\IEEEauthorrefmark{1}, %Homer Simpson\IEEEauthorrefmark{2}, %James Kirk\IEEEauthorrefmark{3}, %Montgomery Scott\IEEEauthorrefmark{3} and %Eldon Tyrell\IEEEauthorrefmark{4}} %\IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical and Computer Engineering\\ %Georgia Institute of Technology, %Atlanta, Georgia 30332--0250\\ Email: see http://www.michaelshell.org/contact.html} %\IEEEauthorblockA{\IEEEauthorrefmark{2}Twentieth Century Fox, Springfield, USA\\ %Email: homer@thesimpsons.com} %\IEEEauthorblockA{\IEEEauthorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\ %Telephone: (800) 555--1212, Fax: (888) 555--1212} %\IEEEauthorblockA{\IEEEauthorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}} % use for special paper notices %\IEEEspecialpapernotice{(Invited Paper)} % make the title area \maketitle % As a general rule, do not put math, special symbols or citations % in the abstract \begin{abstract} The abstract goes here. \end{abstract} % no keywords % For peer review papers, you can put extra information on the cover % page as needed: % \ifCLASSOPTIONpeerreview % \begin{center} \bfseries EDICS Category: 3-BBND \end{center} % \fi % % For peerreview papers, this IEEEtran command inserts a page break and % creates the second title. It will be ignored for other modes. \IEEEpeerreviewmaketitle \section{Introduction} % no \IEEEPARstart This demo file is intended to serve as a starter file'' for IEEE conference papers produced under \LaTeX\ using IEEEtran.cls version 1.8b and later. % You must have at least 2 lines in the paragraph with the drop letter % (should never be an issue) I wish you the best of success. \hfill mds \hfill August 26, 2015 \subsection{Subsection Heading Here} Subsection text here. \subsubsection{Subsubsection Heading Here} Subsubsection text here. % An example of a floating figure using the graphicx package. % Note that \label must occur AFTER (or within) \caption. % For figures, \caption should occur after the \includegraphics. % Note that IEEEtran v1.7 and later has special internal code that % is designed to preserve the operation of \label within \caption % even when the captionsoff option is in effect. However, because % of issues like this, it may be the safest practice to put all your % \label just after \caption rather than within \caption{}. % % Reminder: the "draftcls" or "draftclsnofoot", not "draft", class % option should be used if it is desired that the figures are to be % displayed while in draft mode. % %\begin{figure}[!t] %\centering %\includegraphics[width=2.5in]{myfigure} % where an .eps filename suffix will be assumed under latex, % and a .pdf suffix will be assumed for pdflatex; or what has been declared % via \DeclareGraphicsExtensions. %\caption{Simulation results for the network.} %\label{fig_sim} %\end{figure} % Note that the IEEE typically puts floats only at the top, even when this % results in a large percentage of a column being occupied by floats. % An example of a double column floating figure using two subfigures. % (The subfig.sty package must be loaded for this to work.) % The subfigure \label commands are set within each subfloat command, % and the \label for the overall figure must come after \caption. % \hfil is used as a separator to get equal spacing. % Watch out that the combined width of all the subfigures on a % line do not exceed the text width or a line break will occur. % %\begin{figure*}[!t] %\centering %\subfloat[Case I]{\includegraphics[width=2.5in]{box}% %\label{fig_first_case}} %\hfil %\subfloat[Case II]{\includegraphics[width=2.5in]{box}% %\label{fig_second_case}} %\caption{Simulation results for the network.} %\label{fig_sim} %\end{figure*} % % Note that often IEEE papers with subfigures do not employ subfigure % captions (using the optional argument to \subfloat[]), but instead will % reference/describe all of them (a), (b), etc., within the main caption. % Be aware that for subfig.sty to generate the (a), (b), etc., subfigure % labels, the optional argument to \subfloat must be present. If a % subcaption is not desired, just leave its contents blank, % e.g., \subfloat[]. % An example of a floating table. Note that, for IEEE style tables, the % \caption command should come BEFORE the table and, given that table % captions serve much like titles, are usually capitalized except for words % such as a, an, and, as, at, but, by, for, in, nor, of, on, or, the, to % and up, which are usually not capitalized unless they are the first or % last word of the caption. Table text will default to \footnotesize as % the IEEE normally uses this smaller font for tables. % The \label must come after \caption as always. % %\begin{table}[!t] %% increase table row spacing, adjust to taste %\renewcommand{\arraystretch}{1.3} % if using array.sty, it might be a good idea to tweak the value of % \extrarowheight as needed to properly center the text within the cells %\caption{An Example of a Table} %\label{table_example} %\centering %% Some packages, such as MDW tools, offer better commands for making tables %% than the plain LaTeX2e tabular which is used here. %\begin{tabular}{|c||c|} %\hline %One & Two\\ %\hline %Three & Four\\ %\hline %\end{tabular} %\end{table} % Note that the IEEE does not put floats in the very first column % - or typically anywhere on the first page for that matter. Also, % in-text middle ("here") positioning is typically not used, but it % is allowed and encouraged for Computer Society conferences (but % not Computer Society journals). Most IEEE journals/conferences use % top floats exclusively. % Note that, LaTeX2e, unlike IEEE journals/conferences, places % footnotes above bottom floats. This can be corrected via the % \fnbelowfloat command of the stfloats package. \section{Conclusion} The conclusion goes here. % conference papers do not normally have an appendix % use section* for acknowledgment \section*{Acknowledgment} The authors would like to thank... % trigger a \newpage just before the given reference % number - used to balance the columns on the last page % adjust value as needed - may need to be readjusted if % the document is modified later %\IEEEtriggeratref{8} % The "triggered" command can be changed if desired: %\IEEEtriggercmd{\enlargethispage{-5in}} % references section % can use a bibliography generated by BibTeX as a .bbl file % BibTeX documentation can be easily obtained at: % http://mirror.ctan.org/biblio/bibtex/contrib/doc/ % The IEEEtran BibTeX style support page is at: % http://www.michaelshell.org/tex/ieeetran/bibtex/ %\bibliographystyle{IEEEtran} % argument is your BibTeX string definitions and bibliography database(s) %\bibliography{IEEEabrv,../bib/paper} % % manually copy in the resultant .bbl file % set second argument of \begin to the number of references % (used to reserve space for the reference number labels box) \begin{thebibliography}{1} \bibitem{IEEEhowto:kopka} H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999. \end{thebibliography} % that's all folks \end{document}
You can’t perform that action at this time.