Skip to content
Permalink
6de3b65c7f
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Wello/Wello/www/PhpMyAdmin/libraries/phpseclib/Crypt/Rijndael.php

Go to file
 
 
Cannot retrieve contributors at this time
1479 lines (1360 sloc) 57.2 KB
Raw Blame
<?php
/* vim: set expandtab tabstop=4 shiftwidth=4 softtabstop=4: */
/**
* Pure-PHP implementation of Rijndael.
*
* Does not use mcrypt, even when available, for reasons that are explained below.
*
* PHP versions 4 and 5
*
* If {@link Crypt_Rijndael::setBlockLength() setBlockLength()} isn't called, it'll be assumed to be 128 bits. If
* {@link Crypt_Rijndael::setKeyLength() setKeyLength()} isn't called, it'll be calculated from
* {@link Crypt_Rijndael::setKey() setKey()}. ie. if the key is 128-bits, the key length will be 128-bits. If it's
* 136-bits it'll be null-padded to 160-bits and 160 bits will be the key length until
* {@link Crypt_Rijndael::setKey() setKey()} is called, again, at which point, it'll be recalculated.
*
* Not all Rijndael implementations may support 160-bits or 224-bits as the block length / key length. mcrypt, for example,
* does not. AES, itself, only supports block lengths of 128 and key lengths of 128, 192, and 256.
* {@link http://csrc.nist.gov/archive/aes/rijndael/Rijndael-ammended.pdf#page=10 Rijndael-ammended.pdf#page=10} defines the
* algorithm for block lengths of 192 and 256 but not for block lengths / key lengths of 160 and 224. Indeed, 160 and 224
* are first defined as valid key / block lengths in
* {@link http://csrc.nist.gov/archive/aes/rijndael/Rijndael-ammended.pdf#page=44 Rijndael-ammended.pdf#page=44}:
* Extensions: Other block and Cipher Key lengths.
*
* {@internal The variable names are the same as those in
* {@link http://www.csrc.nist.gov/publications/fips/fips197/fips-197.pdf#page=10 fips-197.pdf#page=10}.}}
*
* Here's a short example of how to use this library:
* <code>
* <?php
* include('Crypt/Rijndael.php');
*
* $rijndael = new Crypt_Rijndael();
*
* $rijndael->setKey('abcdefghijklmnop');
*
* $size = 10 * 1024;
* $plaintext = '';
* for ($i = 0; $i < $size; $i++) {
* $plaintext.= 'a';
* }
*
* echo $rijndael->decrypt($rijndael->encrypt($plaintext));
* ?>
* </code>
*
* LICENSE: Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* @category Crypt
* @package Crypt_Rijndael
* @author Jim Wigginton <terrafrost@php.net>
* @copyright MMVIII Jim Wigginton
* @license http://www.opensource.org/licenses/mit-license.html MIT License
* @version $Id: Rijndael.php,v 1.12 2010/02/09 06:10:26 terrafrost Exp $
* @link http://phpseclib.sourceforge.net
*/
/**#@+
* @access public
* @see Crypt_Rijndael::encrypt()
* @see Crypt_Rijndael::decrypt()
*/
/**
* Encrypt / decrypt using the Counter mode.
*
* Set to -1 since that's what Crypt/Random.php uses to index the CTR mode.
*
* @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Counter_.28CTR.29
*/
define('CRYPT_RIJNDAEL_MODE_CTR', -1);
/**
* Encrypt / decrypt using the Electronic Code Book mode.
*
* @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Electronic_codebook_.28ECB.29
*/
define('CRYPT_RIJNDAEL_MODE_ECB', 1);
/**
* Encrypt / decrypt using the Code Book Chaining mode.
*
* @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Cipher-block_chaining_.28CBC.29
*/
define('CRYPT_RIJNDAEL_MODE_CBC', 2);
/**
* Encrypt / decrypt using the Cipher Feedback mode.
*
* @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Cipher_feedback_.28CFB.29
*/
define('CRYPT_RIJNDAEL_MODE_CFB', 3);
/**
* Encrypt / decrypt using the Cipher Feedback mode.
*
* @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Output_feedback_.28OFB.29
*/
define('CRYPT_RIJNDAEL_MODE_OFB', 4);
/**#@-*/
/**#@+
* @access private
* @see Crypt_Rijndael::Crypt_Rijndael()
*/
/**
* Toggles the internal implementation
*/
define('CRYPT_RIJNDAEL_MODE_INTERNAL', 1);
/**
* Toggles the mcrypt implementation
*/
define('CRYPT_RIJNDAEL_MODE_MCRYPT', 2);
/**#@-*/
/**
* Pure-PHP implementation of Rijndael.
*
* @author Jim Wigginton <terrafrost@php.net>
* @version 0.1.0
* @access public
* @package Crypt_Rijndael
*/
class Crypt_Rijndael {
/**
* The Encryption Mode
*
* @see Crypt_Rijndael::Crypt_Rijndael()
* @var Integer
* @access private
*/
var $mode;
/**
* The Key
*
* @see Crypt_Rijndael::setKey()
* @var String
* @access private
*/
var $key = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0";
/**
* The Initialization Vector
*
* @see Crypt_Rijndael::setIV()
* @var String
* @access private
*/
var $iv = '';
/**
* A "sliding" Initialization Vector
*
* @see Crypt_Rijndael::enableContinuousBuffer()
* @var String
* @access private
*/
var $encryptIV = '';
/**
* A "sliding" Initialization Vector
*
* @see Crypt_Rijndael::enableContinuousBuffer()
* @var String
* @access private
*/
var $decryptIV = '';
/**
* Continuous Buffer status
*
* @see Crypt_Rijndael::enableContinuousBuffer()
* @var Boolean
* @access private
*/
var $continuousBuffer = false;
/**
* Padding status
*
* @see Crypt_Rijndael::enablePadding()
* @var Boolean
* @access private
*/
var $padding = true;
/**
* Does the key schedule need to be (re)calculated?
*
* @see setKey()
* @see setBlockLength()
* @see setKeyLength()
* @var Boolean
* @access private
*/
var $changed = true;
/**
* Has the key length explicitly been set or should it be derived from the key, itself?
*
* @see setKeyLength()
* @var Boolean
* @access private
*/
var $explicit_key_length = false;
/**
* The Key Schedule
*
* @see _setup()
* @var Array
* @access private
*/
var $w;
/**
* The Inverse Key Schedule
*
* @see _setup()
* @var Array
* @access private
*/
var $dw;
/**
* The Block Length
*
* @see setBlockLength()
* @var Integer
* @access private
* @internal The max value is 32, the min value is 16. All valid values are multiples of 4. Exists in conjunction with
* $Nb because we need this value and not $Nb to pad strings appropriately.
*/
var $block_size = 16;
/**
* The Block Length divided by 32
*
* @see setBlockLength()
* @var Integer
* @access private
* @internal The max value is 256 / 32 = 8, the min value is 128 / 32 = 4. Exists in conjunction with $block_size
* because the encryption / decryption / key schedule creation requires this number and not $block_size. We could
* derive this from $block_size or vice versa, but that'd mean we'd have to do multiple shift operations, so in lieu
* of that, we'll just precompute it once.
*
*/
var $Nb = 4;
/**
* The Key Length
*
* @see setKeyLength()
* @var Integer
* @access private
* @internal The max value is 256 / 8 = 32, the min value is 128 / 8 = 16. Exists in conjunction with $key_size
* because the encryption / decryption / key schedule creation requires this number and not $key_size. We could
* derive this from $key_size or vice versa, but that'd mean we'd have to do multiple shift operations, so in lieu
* of that, we'll just precompute it once.
*/
var $key_size = 16;
/**
* The Key Length divided by 32
*
* @see setKeyLength()
* @var Integer
* @access private
* @internal The max value is 256 / 32 = 8, the min value is 128 / 32 = 4
*/
var $Nk = 4;
/**
* The Number of Rounds
*
* @var Integer
* @access private
* @internal The max value is 14, the min value is 10.
*/
var $Nr;
/**
* Shift offsets
*
* @var Array
* @access private
*/
var $c;
/**
* Precomputed mixColumns table
*
* @see Crypt_Rijndael()
* @var Array
* @access private
*/
var $t0;
/**
* Precomputed mixColumns table
*
* @see Crypt_Rijndael()
* @var Array
* @access private
*/
var $t1;
/**
* Precomputed mixColumns table
*
* @see Crypt_Rijndael()
* @var Array
* @access private
*/
var $t2;
/**
* Precomputed mixColumns table
*
* @see Crypt_Rijndael()
* @var Array
* @access private
*/
var $t3;
/**
* Precomputed invMixColumns table
*
* @see Crypt_Rijndael()
* @var Array
* @access private
*/
var $dt0;
/**
* Precomputed invMixColumns table
*
* @see Crypt_Rijndael()
* @var Array
* @access private
*/
var $dt1;
/**
* Precomputed invMixColumns table
*
* @see Crypt_Rijndael()
* @var Array
* @access private
*/
var $dt2;
/**
* Precomputed invMixColumns table
*
* @see Crypt_Rijndael()
* @var Array
* @access private
*/
var $dt3;
/**
* Is the mode one that is paddable?
*
* @see Crypt_Rijndael::Crypt_Rijndael()
* @var Boolean
* @access private
*/
var $paddable = false;
/**
* Encryption buffer for CTR, OFB and CFB modes
*
* @see Crypt_Rijndael::encrypt()
* @var String
* @access private
*/
var $enbuffer = array('encrypted' => '', 'xor' => '');
/**
* Decryption buffer for CTR, OFB and CFB modes
*
* @see Crypt_Rijndael::decrypt()
* @var String
* @access private
*/
var $debuffer = array('ciphertext' => '');
/**
* Default Constructor.
*
* Determines whether or not the mcrypt extension should be used. $mode should only, at present, be
* CRYPT_RIJNDAEL_MODE_ECB or CRYPT_RIJNDAEL_MODE_CBC. If not explictly set, CRYPT_RIJNDAEL_MODE_CBC will be used.
*
* @param optional Integer $mode
* @return Crypt_Rijndael
* @access public
*/
function Crypt_Rijndael($mode = CRYPT_RIJNDAEL_MODE_CBC)
{
switch ($mode) {
case CRYPT_RIJNDAEL_MODE_ECB:
case CRYPT_RIJNDAEL_MODE_CBC:
$this->paddable = true;
$this->mode = $mode;
break;
case CRYPT_RIJNDAEL_MODE_CTR:
case CRYPT_RIJNDAEL_MODE_CFB:
case CRYPT_RIJNDAEL_MODE_OFB:
$this->mode = $mode;
break;
default:
$this->paddable = true;
$this->mode = CRYPT_RIJNDAEL_MODE_CBC;
}
$t3 = &$this->t3;
$t2 = &$this->t2;
$t1 = &$this->t1;
$t0 = &$this->t0;
$dt3 = &$this->dt3;
$dt2 = &$this->dt2;
$dt1 = &$this->dt1;
$dt0 = &$this->dt0;
// according to <http://csrc.nist.gov/archive/aes/rijndael/Rijndael-ammended.pdf#page=19> (section 5.2.1),
// precomputed tables can be used in the mixColumns phase. in that example, they're assigned t0...t3, so
// those are the names we'll use.
$t3 = array(
0x6363A5C6, 0x7C7C84F8, 0x777799EE, 0x7B7B8DF6, 0xF2F20DFF, 0x6B6BBDD6, 0x6F6FB1DE, 0xC5C55491,
0x30305060, 0x01010302, 0x6767A9CE, 0x2B2B7D56, 0xFEFE19E7, 0xD7D762B5, 0xABABE64D, 0x76769AEC,
0xCACA458F, 0x82829D1F, 0xC9C94089, 0x7D7D87FA, 0xFAFA15EF, 0x5959EBB2, 0x4747C98E, 0xF0F00BFB,
0xADADEC41, 0xD4D467B3, 0xA2A2FD5F, 0xAFAFEA45, 0x9C9CBF23, 0xA4A4F753, 0x727296E4, 0xC0C05B9B,
0xB7B7C275, 0xFDFD1CE1, 0x9393AE3D, 0x26266A4C, 0x36365A6C, 0x3F3F417E, 0xF7F702F5, 0xCCCC4F83,
0x34345C68, 0xA5A5F451, 0xE5E534D1, 0xF1F108F9, 0x717193E2, 0xD8D873AB, 0x31315362, 0x15153F2A,
0x04040C08, 0xC7C75295, 0x23236546, 0xC3C35E9D, 0x18182830, 0x9696A137, 0x05050F0A, 0x9A9AB52F,
0x0707090E, 0x12123624, 0x80809B1B, 0xE2E23DDF, 0xEBEB26CD, 0x2727694E, 0xB2B2CD7F, 0x75759FEA,
0x09091B12, 0x83839E1D, 0x2C2C7458, 0x1A1A2E34, 0x1B1B2D36, 0x6E6EB2DC, 0x5A5AEEB4, 0xA0A0FB5B,
0x5252F6A4, 0x3B3B4D76, 0xD6D661B7, 0xB3B3CE7D, 0x29297B52, 0xE3E33EDD, 0x2F2F715E, 0x84849713,
0x5353F5A6, 0xD1D168B9, 0x00000000, 0xEDED2CC1, 0x20206040, 0xFCFC1FE3, 0xB1B1C879, 0x5B5BEDB6,
0x6A6ABED4, 0xCBCB468D, 0xBEBED967, 0x39394B72, 0x4A4ADE94, 0x4C4CD498, 0x5858E8B0, 0xCFCF4A85,
0xD0D06BBB, 0xEFEF2AC5, 0xAAAAE54F, 0xFBFB16ED, 0x4343C586, 0x4D4DD79A, 0x33335566, 0x85859411,
0x4545CF8A, 0xF9F910E9, 0x02020604, 0x7F7F81FE, 0x5050F0A0, 0x3C3C4478, 0x9F9FBA25, 0xA8A8E34B,
0x5151F3A2, 0xA3A3FE5D, 0x4040C080, 0x8F8F8A05, 0x9292AD3F, 0x9D9DBC21, 0x38384870, 0xF5F504F1,
0xBCBCDF63, 0xB6B6C177, 0xDADA75AF, 0x21216342, 0x10103020, 0xFFFF1AE5, 0xF3F30EFD, 0xD2D26DBF,
0xCDCD4C81, 0x0C0C1418, 0x13133526, 0xECEC2FC3, 0x5F5FE1BE, 0x9797A235, 0x4444CC88, 0x1717392E,
0xC4C45793, 0xA7A7F255, 0x7E7E82FC, 0x3D3D477A, 0x6464ACC8, 0x5D5DE7BA, 0x19192B32, 0x737395E6,
0x6060A0C0, 0x81819819, 0x4F4FD19E, 0xDCDC7FA3, 0x22226644, 0x2A2A7E54, 0x9090AB3B, 0x8888830B,
0x4646CA8C, 0xEEEE29C7, 0xB8B8D36B, 0x14143C28, 0xDEDE79A7, 0x5E5EE2BC, 0x0B0B1D16, 0xDBDB76AD,
0xE0E03BDB, 0x32325664, 0x3A3A4E74, 0x0A0A1E14, 0x4949DB92, 0x06060A0C, 0x24246C48, 0x5C5CE4B8,
0xC2C25D9F, 0xD3D36EBD, 0xACACEF43, 0x6262A6C4, 0x9191A839, 0x9595A431, 0xE4E437D3, 0x79798BF2,
0xE7E732D5, 0xC8C8438B, 0x3737596E, 0x6D6DB7DA, 0x8D8D8C01, 0xD5D564B1, 0x4E4ED29C, 0xA9A9E049,
0x6C6CB4D8, 0x5656FAAC, 0xF4F407F3, 0xEAEA25CF, 0x6565AFCA, 0x7A7A8EF4, 0xAEAEE947, 0x08081810,
0xBABAD56F, 0x787888F0, 0x25256F4A, 0x2E2E725C, 0x1C1C2438, 0xA6A6F157, 0xB4B4C773, 0xC6C65197,
0xE8E823CB, 0xDDDD7CA1, 0x74749CE8, 0x1F1F213E, 0x4B4BDD96, 0xBDBDDC61, 0x8B8B860D, 0x8A8A850F,
0x707090E0, 0x3E3E427C, 0xB5B5C471, 0x6666AACC, 0x4848D890, 0x03030506, 0xF6F601F7, 0x0E0E121C,
0x6161A3C2, 0x35355F6A, 0x5757F9AE, 0xB9B9D069, 0x86869117, 0xC1C15899, 0x1D1D273A, 0x9E9EB927,
0xE1E138D9, 0xF8F813EB, 0x9898B32B, 0x11113322, 0x6969BBD2, 0xD9D970A9, 0x8E8E8907, 0x9494A733,
0x9B9BB62D, 0x1E1E223C, 0x87879215, 0xE9E920C9, 0xCECE4987, 0x5555FFAA, 0x28287850, 0xDFDF7AA5,
0x8C8C8F03, 0xA1A1F859, 0x89898009, 0x0D0D171A, 0xBFBFDA65, 0xE6E631D7, 0x4242C684, 0x6868B8D0,
0x4141C382, 0x9999B029, 0x2D2D775A, 0x0F0F111E, 0xB0B0CB7B, 0x5454FCA8, 0xBBBBD66D, 0x16163A2C
);
$dt3 = array(
0xF4A75051, 0x4165537E, 0x17A4C31A, 0x275E963A, 0xAB6BCB3B, 0x9D45F11F, 0xFA58ABAC, 0xE303934B,
0x30FA5520, 0x766DF6AD, 0xCC769188, 0x024C25F5, 0xE5D7FC4F, 0x2ACBD7C5, 0x35448026, 0x62A38FB5,
0xB15A49DE, 0xBA1B6725, 0xEA0E9845, 0xFEC0E15D, 0x2F7502C3, 0x4CF01281, 0x4697A38D, 0xD3F9C66B,
0x8F5FE703, 0x929C9515, 0x6D7AEBBF, 0x5259DA95, 0xBE832DD4, 0x7421D358, 0xE0692949, 0xC9C8448E,
0xC2896A75, 0x8E7978F4, 0x583E6B99, 0xB971DD27, 0xE14FB6BE, 0x88AD17F0, 0x20AC66C9, 0xCE3AB47D,
0xDF4A1863, 0x1A3182E5, 0x51336097, 0x537F4562, 0x6477E0B1, 0x6BAE84BB, 0x81A01CFE, 0x082B94F9,
0x48685870, 0x45FD198F, 0xDE6C8794, 0x7BF8B752, 0x73D323AB, 0x4B02E272, 0x1F8F57E3, 0x55AB2A66,
0xEB2807B2, 0xB5C2032F, 0xC57B9A86, 0x3708A5D3, 0x2887F230, 0xBFA5B223, 0x036ABA02, 0x16825CED,
0xCF1C2B8A, 0x79B492A7, 0x07F2F0F3, 0x69E2A14E, 0xDAF4CD65, 0x05BED506, 0x34621FD1, 0xA6FE8AC4,
0x2E539D34, 0xF355A0A2, 0x8AE13205, 0xF6EB75A4, 0x83EC390B, 0x60EFAA40, 0x719F065E, 0x6E1051BD,
0x218AF93E, 0xDD063D96, 0x3E05AEDD, 0xE6BD464D, 0x548DB591, 0xC45D0571, 0x06D46F04, 0x5015FF60,
0x98FB2419, 0xBDE997D6, 0x4043CC89, 0xD99E7767, 0xE842BDB0, 0x898B8807, 0x195B38E7, 0xC8EEDB79,
0x7C0A47A1, 0x420FE97C, 0x841EC9F8, 0x00000000, 0x80868309, 0x2BED4832, 0x1170AC1E, 0x5A724E6C,
0x0EFFFBFD, 0x8538560F, 0xAED51E3D, 0x2D392736, 0x0FD9640A, 0x5CA62168, 0x5B54D19B, 0x362E3A24,
0x0A67B10C, 0x57E70F93, 0xEE96D2B4, 0x9B919E1B, 0xC0C54F80, 0xDC20A261, 0x774B695A, 0x121A161C,
0x93BA0AE2, 0xA02AE5C0, 0x22E0433C, 0x1B171D12, 0x090D0B0E, 0x8BC7ADF2, 0xB6A8B92D, 0x1EA9C814,
0xF1198557, 0x75074CAF, 0x99DDBBEE, 0x7F60FDA3, 0x01269FF7, 0x72F5BC5C, 0x663BC544, 0xFB7E345B,
0x4329768B, 0x23C6DCCB, 0xEDFC68B6, 0xE4F163B8, 0x31DCCAD7, 0x63851042, 0x97224013, 0xC6112084,
0x4A247D85, 0xBB3DF8D2, 0xF93211AE, 0x29A16DC7, 0x9E2F4B1D, 0xB230F3DC, 0x8652EC0D, 0xC1E3D077,
0xB3166C2B, 0x70B999A9, 0x9448FA11, 0xE9642247, 0xFC8CC4A8, 0xF03F1AA0, 0x7D2CD856, 0x3390EF22,
0x494EC787, 0x38D1C1D9, 0xCAA2FE8C, 0xD40B3698, 0xF581CFA6, 0x7ADE28A5, 0xB78E26DA, 0xADBFA43F,
0x3A9DE42C, 0x78920D50, 0x5FCC9B6A, 0x7E466254, 0x8D13C2F6, 0xD8B8E890, 0x39F75E2E, 0xC3AFF582,
0x5D80BE9F, 0xD0937C69, 0xD52DA96F, 0x2512B3CF, 0xAC993BC8, 0x187DA710, 0x9C636EE8, 0x3BBB7BDB,
0x267809CD, 0x5918F46E, 0x9AB701EC, 0x4F9AA883, 0x956E65E6, 0xFFE67EAA, 0xBCCF0821, 0x15E8E6EF,
0xE79BD9BA, 0x6F36CE4A, 0x9F09D4EA, 0xB07CD629, 0xA4B2AF31, 0x3F23312A, 0xA59430C6, 0xA266C035,
0x4EBC3774, 0x82CAA6FC, 0x90D0B0E0, 0xA7D81533, 0x04984AF1, 0xECDAF741, 0xCD500E7F, 0x91F62F17,
0x4DD68D76, 0xEFB04D43, 0xAA4D54CC, 0x9604DFE4, 0xD1B5E39E, 0x6A881B4C, 0x2C1FB8C1, 0x65517F46,
0x5EEA049D, 0x8C355D01, 0x877473FA, 0x0B412EFB, 0x671D5AB3, 0xDBD25292, 0x105633E9, 0xD647136D,
0xD7618C9A, 0xA10C7A37, 0xF8148E59, 0x133C89EB, 0xA927EECE, 0x61C935B7, 0x1CE5EDE1, 0x47B13C7A,
0xD2DF599C, 0xF2733F55, 0x14CE7918, 0xC737BF73, 0xF7CDEA53, 0xFDAA5B5F, 0x3D6F14DF, 0x44DB8678,
0xAFF381CA, 0x68C43EB9, 0x24342C38, 0xA3405FC2, 0x1DC37216, 0xE2250CBC, 0x3C498B28, 0x0D9541FF,
0xA8017139, 0x0CB3DE08, 0xB4E49CD8, 0x56C19064, 0xCB84617B, 0x32B670D5, 0x6C5C7448, 0xB85742D0
);
for ($i = 0; $i < 256; $i++) {
$t2[$i << 8] = (($t3[$i] << 8) & 0xFFFFFF00) | (($t3[$i] >> 24) & 0x000000FF);
$t1[$i << 16] = (($t3[$i] << 16) & 0xFFFF0000) | (($t3[$i] >> 16) & 0x0000FFFF);
$t0[$i << 24] = (($t3[$i] << 24) & 0xFF000000) | (($t3[$i] >> 8) & 0x00FFFFFF);
$dt2[$i << 8] = (($this->dt3[$i] << 8) & 0xFFFFFF00) | (($dt3[$i] >> 24) & 0x000000FF);
$dt1[$i << 16] = (($this->dt3[$i] << 16) & 0xFFFF0000) | (($dt3[$i] >> 16) & 0x0000FFFF);
$dt0[$i << 24] = (($this->dt3[$i] << 24) & 0xFF000000) | (($dt3[$i] >> 8) & 0x00FFFFFF);
}
}
/**
* Sets the key.
*
* Keys can be of any length. Rijndael, itself, requires the use of a key that's between 128-bits and 256-bits long and
* whose length is a multiple of 32. If the key is less than 256-bits and the key length isn't set, we round the length
* up to the closest valid key length, padding $key with null bytes. If the key is more than 256-bits, we trim the
* excess bits.
*
* If the key is not explicitly set, it'll be assumed to be all null bytes.
*
* @access public
* @param String $key
*/
function setKey($key)
{
$this->key = $key;
$this->changed = true;
}
/**
* Sets the initialization vector. (optional)
*
* SetIV is not required when CRYPT_RIJNDAEL_MODE_ECB is being used. If not explictly set, it'll be assumed
* to be all zero's.
*
* @access public
* @param String $iv
*/
function setIV($iv)
{
$this->encryptIV = $this->decryptIV = $this->iv = str_pad(substr($iv, 0, $this->block_size), $this->block_size, chr(0));
}
/**
* Sets the key length
*
* Valid key lengths are 128, 160, 192, 224, and 256. If the length is less than 128, it will be rounded up to
* 128. If the length is greater then 128 and invalid, it will be rounded down to the closest valid amount.
*
* @access public
* @param Integer $length
*/
function setKeyLength($length)
{
$length >>= 5;
if ($length > 8) {
$length = 8;
} else if ($length < 4) {
$length = 4;
}
$this->Nk = $length;
$this->key_size = $length << 2;
$this->explicit_key_length = true;
$this->changed = true;
}
/**
* Sets the password.
*
* Depending on what $method is set to, setPassword()'s (optional) parameters are as follows:
* {@link http://en.wikipedia.org/wiki/PBKDF2 pbkdf2}:
* $hash, $salt, $count
* Set $dkLen by calling setKeyLength()
*
* @param String $password
* @param optional String $method
* @access public
*/
function setPassword($password, $method = 'pbkdf2')
{
$key = '';
switch ($method) {
default: // 'pbkdf2'
list(, , $hash, $salt, $count) = func_get_args();
if (!isset($hash)) {
$hash = 'sha1';
}
// WPA and WPA use the SSID as the salt
if (!isset($salt)) {
$salt = 'phpseclib/salt';
}
// RFC2898#section-4.2 uses 1,000 iterations by default
// WPA and WPA2 use 4,096.
if (!isset($count)) {
$count = 1000;
}
if (!class_exists('Crypt_Hash')) {
require_once('Crypt/Hash.php');
}
$i = 1;
while (strlen($key) < $this->key_size) { // $dkLen == $this->key_size
//$dk.= $this->_pbkdf($password, $salt, $count, $i++);
$hmac = new Crypt_Hash();
$hmac->setHash($hash);
$hmac->setKey($password);
$f = $u = $hmac->hash($salt . pack('N', $i++));
for ($j = 2; $j <= $count; $j++) {
$u = $hmac->hash($u);
$f^= $u;
}
$key.= $f;
}
}
$this->setKey(substr($key, 0, $this->key_size));
}
/**
* Sets the block length
*
* Valid block lengths are 128, 160, 192, 224, and 256. If the length is less than 128, it will be rounded up to
* 128. If the length is greater then 128 and invalid, it will be rounded down to the closest valid amount.
*
* @access public
* @param Integer $length
*/
function setBlockLength($length)
{
$length >>= 5;
if ($length > 8) {
$length = 8;
} else if ($length < 4) {
$length = 4;
}
$this->Nb = $length;
$this->block_size = $length << 2;
$this->changed = true;
}
/**
* Generate CTR XOR encryption key
*
* Encrypt the output of this and XOR it against the ciphertext / plaintext to get the
* plaintext / ciphertext in CTR mode.
*
* @see Crypt_Rijndael::decrypt()
* @see Crypt_Rijndael::encrypt()
* @access public
* @param Integer $length
* @param String $iv
*/
function _generate_xor($length, &$iv)
{
$xor = '';
$block_size = $this->block_size;
$num_blocks = floor(($length + ($block_size - 1)) / $block_size);
for ($i = 0; $i < $num_blocks; $i++) {
$xor.= $iv;
for ($j = 4; $j <= $block_size; $j+=4) {
$temp = substr($iv, -$j, 4);
switch ($temp) {
case "\xFF\xFF\xFF\xFF":
$iv = substr_replace($iv, "\x00\x00\x00\x00", -$j, 4);
break;
case "\x7F\xFF\xFF\xFF":
$iv = substr_replace($iv, "\x80\x00\x00\x00", -$j, 4);
break 2;
default:
extract(unpack('Ncount', $temp));
$iv = substr_replace($iv, pack('N', $count + 1), -$j, 4);
break 2;
}
}
}
return $xor;
}
/**
* Encrypts a message.
*
* $plaintext will be padded with additional bytes such that it's length is a multiple of the block size. Other Rjindael
* implementations may or may not pad in the same manner. Other common approaches to padding and the reasons why it's
* necessary are discussed in the following
* URL:
*
* {@link http://www.di-mgt.com.au/cryptopad.html http://www.di-mgt.com.au/cryptopad.html}
*
* An alternative to padding is to, separately, send the length of the file. This is what SSH, in fact, does.
* strlen($plaintext) will still need to be a multiple of 8, however, arbitrary values can be added to make it that
* length.
*
* @see Crypt_Rijndael::decrypt()
* @access public
* @param String $plaintext
*/
function encrypt($plaintext)
{
$this->_setup();
if ($this->paddable) {
$plaintext = $this->_pad($plaintext);
}
$block_size = $this->block_size;
$buffer = &$this->enbuffer;
$continuousBuffer = $this->continuousBuffer;
$ciphertext = '';
switch ($this->mode) {
case CRYPT_RIJNDAEL_MODE_ECB:
for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
$ciphertext.= $this->_encryptBlock(substr($plaintext, $i, $block_size));
}
break;
case CRYPT_RIJNDAEL_MODE_CBC:
$xor = $this->encryptIV;
for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
$block = substr($plaintext, $i, $block_size);
$block = $this->_encryptBlock($block ^ $xor);
$xor = $block;
$ciphertext.= $block;
}
if ($this->continuousBuffer) {
$this->encryptIV = $xor;
}
break;
case CRYPT_RIJNDAEL_MODE_CTR:
$xor = $this->encryptIV;
if (!empty($buffer['encrypted'])) {
for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
$block = substr($plaintext, $i, $block_size);
$buffer['encrypted'].= $this->_encryptBlock($this->_generate_xor($block_size, $xor));
$key = $this->_string_shift($buffer['encrypted'], $block_size);
$ciphertext.= $block ^ $key;
}
} else {
for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
$block = substr($plaintext, $i, $block_size);
$key = $this->_encryptBlock($this->_generate_xor($block_size, $xor));
$ciphertext.= $block ^ $key;
}
}
if ($this->continuousBuffer) {
$this->encryptIV = $xor;
if ($start = strlen($plaintext) % $block_size) {
$buffer['encrypted'] = substr($key, $start) . $buffer['encrypted'];
}
}
break;
case CRYPT_RIJNDAEL_MODE_CFB:
if (!empty($buffer['xor'])) {
$ciphertext = $plaintext ^ $buffer['xor'];
$iv = $buffer['encrypted'] . $ciphertext;
$start = strlen($ciphertext);
$buffer['encrypted'].= $ciphertext;
$buffer['xor'] = substr($buffer['xor'], strlen($ciphertext));
} else {
$ciphertext = '';
$iv = $this->encryptIV;
$start = 0;
}
for ($i = $start; $i < strlen($plaintext); $i+=$block_size) {
$block = substr($plaintext, $i, $block_size);
$xor = $this->_encryptBlock($iv);
$iv = $block ^ $xor;
if ($continuousBuffer && strlen($iv) != $block_size) {
$buffer = array(
'encrypted' => $iv,
'xor' => substr($xor, strlen($iv))
);
}
$ciphertext.= $iv;
}
if ($this->continuousBuffer) {
$this->encryptIV = $iv;
}
break;
case CRYPT_RIJNDAEL_MODE_OFB:
$xor = $this->encryptIV;
if (strlen($buffer)) {
for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
$xor = $this->_encryptBlock($xor);
$buffer.= $xor;
$key = $this->_string_shift($buffer, $block_size);
$ciphertext.= substr($plaintext, $i, $block_size) ^ $key;
}
} else {
for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
$xor = $this->_encryptBlock($xor);
$ciphertext.= substr($plaintext, $i, $block_size) ^ $xor;
}
$key = $xor;
}
if ($this->continuousBuffer) {
$this->encryptIV = $xor;
if ($start = strlen($plaintext) % $block_size) {
$buffer = substr($key, $start) . $buffer;
}
}
}
return $ciphertext;
}
/**
* Decrypts a message.
*
* If strlen($ciphertext) is not a multiple of the block size, null bytes will be added to the end of the string until
* it is.
*
* @see Crypt_Rijndael::encrypt()
* @access public
* @param String $ciphertext
*/
function decrypt($ciphertext)
{
$this->_setup();
if ($this->paddable) {
// we pad with chr(0) since that's what mcrypt_generic does. to quote from http://php.net/function.mcrypt-generic :
// "The data is padded with "\0" to make sure the length of the data is n * blocksize."
$ciphertext = str_pad($ciphertext, strlen($ciphertext) + ($this->block_size - strlen($ciphertext) % $this->block_size) % $this->block_size, chr(0));
}
$block_size = $this->block_size;
$buffer = &$this->debuffer;
$continuousBuffer = $this->continuousBuffer;
$plaintext = '';
switch ($this->mode) {
case CRYPT_RIJNDAEL_MODE_ECB:
for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
$plaintext.= $this->_decryptBlock(substr($ciphertext, $i, $block_size));
}
break;
case CRYPT_RIJNDAEL_MODE_CBC:
$xor = $this->decryptIV;
for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
$block = substr($ciphertext, $i, $block_size);
$plaintext.= $this->_decryptBlock($block) ^ $xor;
$xor = $block;
}
if ($this->continuousBuffer) {
$this->decryptIV = $xor;
}
break;
case CRYPT_RIJNDAEL_MODE_CTR:
$xor = $this->decryptIV;
if (!empty($buffer['ciphertext'])) {
for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
$block = substr($ciphertext, $i, $block_size);
$buffer['ciphertext'].= $this->_encryptBlock($this->_generate_xor($block_size, $xor));
$key = $this->_string_shift($buffer['ciphertext'], $block_size);
$plaintext.= $block ^ $key;
}
} else {
for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
$block = substr($ciphertext, $i, $block_size);
$key = $this->_encryptBlock($this->_generate_xor($block_size, $xor));
$plaintext.= $block ^ $key;
}
}
if ($this->continuousBuffer) {
$this->decryptIV = $xor;
if ($start = strlen($ciphertext) % $block_size) {
$buffer['ciphertext'] = substr($key, $start) . $buffer['encrypted'];
}
}
break;
case CRYPT_RIJNDAEL_MODE_CFB:
if (!empty($buffer['ciphertext'])) {
$plaintext = $ciphertext ^ substr($this->decryptIV, strlen($buffer['ciphertext']));
$buffer['ciphertext'].= substr($ciphertext, 0, strlen($plaintext));
if (strlen($buffer['ciphertext']) == $block_size) {
$xor = $this->_encryptBlock($buffer['ciphertext']);
$buffer['ciphertext'] = '';
}
$start = strlen($plaintext);
$block = $this->decryptIV;
} else {
$plaintext = '';
$xor = $this->_encryptBlock($this->decryptIV);
$start = 0;
}
for ($i = $start; $i < strlen($ciphertext); $i+=$block_size) {
$block = substr($ciphertext, $i, $block_size);
$plaintext.= $block ^ $xor;
if ($continuousBuffer && strlen($block) != $block_size) {
$buffer['ciphertext'].= $block;
$block = $xor;
} else if (strlen($block) == $block_size) {
$xor = $this->_encryptBlock($block);
}
}
if ($this->continuousBuffer) {
$this->decryptIV = $block;
}
break;
case CRYPT_RIJNDAEL_MODE_OFB:
$xor = $this->decryptIV;
if (strlen($buffer)) {
for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
$xor = $this->_encryptBlock($xor);
$buffer.= $xor;
$key = $this->_string_shift($buffer, $block_size);
$plaintext.= substr($ciphertext, $i, $block_size) ^ $key;
}
} else {
for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
$xor = $this->_encryptBlock($xor);
$plaintext.= substr($ciphertext, $i, $block_size) ^ $xor;
}
$key = $xor;
}
if ($this->continuousBuffer) {
$this->decryptIV = $xor;
if ($start = strlen($ciphertext) % $block_size) {
$buffer = substr($key, $start) . $buffer;
}
}
}
return $this->paddable ? $this->_unpad($plaintext) : $plaintext;
}
/**
* Encrypts a block
*
* @access private
* @param String $in
* @return String
*/
function _encryptBlock($in)
{
$state = array();
$words = unpack('N*word', $in);
$w = $this->w;
$t0 = $this->t0;
$t1 = $this->t1;
$t2 = $this->t2;
$t3 = $this->t3;
$Nb = $this->Nb;
$Nr = $this->Nr;
$c = $this->c;
// addRoundKey
$i = 0;
foreach ($words as $word) {
$state[] = $word ^ $w[0][$i++];
}
// fips-197.pdf#page=19, "Figure 5. Pseudo Code for the Cipher", states that this loop has four components -
// subBytes, shiftRows, mixColumns, and addRoundKey. fips-197.pdf#page=30, "Implementation Suggestions Regarding
// Various Platforms" suggests that performs enhanced implementations are described in Rijndael-ammended.pdf.
// Rijndael-ammended.pdf#page=20, "Implementation aspects / 32-bit processor", discusses such an optimization.
// Unfortunately, the description given there is not quite correct. Per aes.spec.v316.pdf#page=19 [1],
// equation (7.4.7) is supposed to use addition instead of subtraction, so we'll do that here, as well.
// [1] http://fp.gladman.plus.com/cryptography_technology/rijndael/aes.spec.v316.pdf
$temp = array();
for ($round = 1; $round < $Nr; $round++) {
$i = 0; // $c[0] == 0
$j = $c[1];
$k = $c[2];
$l = $c[3];
while ($i < $this->Nb) {
$temp[$i] = $t0[$state[$i] & 0xFF000000] ^
$t1[$state[$j] & 0x00FF0000] ^
$t2[$state[$k] & 0x0000FF00] ^
$t3[$state[$l] & 0x000000FF] ^
$w[$round][$i];
$i++;
$j = ($j + 1) % $Nb;
$k = ($k + 1) % $Nb;
$l = ($l + 1) % $Nb;
}
for ($i = 0; $i < $Nb; $i++) {
$state[$i] = $temp[$i];
}
}
// subWord
for ($i = 0; $i < $Nb; $i++) {
$state[$i] = $this->_subWord($state[$i]);
}
// shiftRows + addRoundKey
$i = 0; // $c[0] == 0
$j = $c[1];
$k = $c[2];
$l = $c[3];
while ($i < $this->Nb) {
$temp[$i] = ($state[$i] & 0xFF000000) ^
($state[$j] & 0x00FF0000) ^
($state[$k] & 0x0000FF00) ^
($state[$l] & 0x000000FF) ^
$w[$Nr][$i];
$i++;
$j = ($j + 1) % $Nb;
$k = ($k + 1) % $Nb;
$l = ($l + 1) % $Nb;
}
$state = $temp;
array_unshift($state, 'N*');
return call_user_func_array('pack', $state);
}
/**
* Decrypts a block
*
* @access private
* @param String $in
* @return String
*/
function _decryptBlock($in)
{
$state = array();
$words = unpack('N*word', $in);
$num_states = count($state);
$dw = $this->dw;
$dt0 = $this->dt0;
$dt1 = $this->dt1;
$dt2 = $this->dt2;
$dt3 = $this->dt3;
$Nb = $this->Nb;
$Nr = $this->Nr;
$c = $this->c;
// addRoundKey
$i = 0;
foreach ($words as $word) {
$state[] = $word ^ $dw[$Nr][$i++];
}
$temp = array();
for ($round = $Nr - 1; $round > 0; $round--) {
$i = 0; // $c[0] == 0
$j = $Nb - $c[1];
$k = $Nb - $c[2];
$l = $Nb - $c[3];
while ($i < $Nb) {
$temp[$i] = $dt0[$state[$i] & 0xFF000000] ^
$dt1[$state[$j] & 0x00FF0000] ^
$dt2[$state[$k] & 0x0000FF00] ^
$dt3[$state[$l] & 0x000000FF] ^
$dw[$round][$i];
$i++;
$j = ($j + 1) % $Nb;
$k = ($k + 1) % $Nb;
$l = ($l + 1) % $Nb;
}
for ($i = 0; $i < $Nb; $i++) {
$state[$i] = $temp[$i];
}
}
// invShiftRows + invSubWord + addRoundKey
$i = 0; // $c[0] == 0
$j = $Nb - $c[1];
$k = $Nb - $c[2];
$l = $Nb - $c[3];
while ($i < $Nb) {
$temp[$i] = $dw[0][$i] ^
$this->_invSubWord(($state[$i] & 0xFF000000) |
($state[$j] & 0x00FF0000) |
($state[$k] & 0x0000FF00) |
($state[$l] & 0x000000FF));
$i++;
$j = ($j + 1) % $Nb;
$k = ($k + 1) % $Nb;
$l = ($l + 1) % $Nb;
}
$state = $temp;
array_unshift($state, 'N*');
return call_user_func_array('pack', $state);
}
/**
* Setup Rijndael
*
* Validates all the variables and calculates $Nr - the number of rounds that need to be performed - and $w - the key
* key schedule.
*
* @access private
*/
function _setup()
{
// Each number in $rcon is equal to the previous number multiplied by two in Rijndael's finite field.
// See http://en.wikipedia.org/wiki/Finite_field_arithmetic#Multiplicative_inverse
static $rcon = array(0,
0x01000000, 0x02000000, 0x04000000, 0x08000000, 0x10000000,
0x20000000, 0x40000000, 0x80000000, 0x1B000000, 0x36000000,
0x6C000000, 0xD8000000, 0xAB000000, 0x4D000000, 0x9A000000,
0x2F000000, 0x5E000000, 0xBC000000, 0x63000000, 0xC6000000,
0x97000000, 0x35000000, 0x6A000000, 0xD4000000, 0xB3000000,
0x7D000000, 0xFA000000, 0xEF000000, 0xC5000000, 0x91000000
);
if (!$this->changed) {
return;
}
if (!$this->explicit_key_length) {
// we do >> 2, here, and not >> 5, as we do above, since strlen($this->key) tells us the number of bytes - not bits
$length = strlen($this->key) >> 2;
if ($length > 8) {
$length = 8;
} else if ($length < 4) {
$length = 4;
}
$this->Nk = $length;
$this->key_size = $length << 2;
}
$this->key = str_pad(substr($this->key, 0, $this->key_size), $this->key_size, chr(0));
$this->encryptIV = $this->decryptIV = $this->iv = str_pad(substr($this->iv, 0, $this->block_size), $this->block_size, chr(0));
// see Rijndael-ammended.pdf#page=44
$this->Nr = max($this->Nk, $this->Nb) + 6;
// shift offsets for Nb = 5, 7 are defined in Rijndael-ammended.pdf#page=44,
// "Table 8: Shift offsets in Shiftrow for the alternative block lengths"
// shift offsets for Nb = 4, 6, 8 are defined in Rijndael-ammended.pdf#page=14,
// "Table 2: Shift offsets for different block lengths"
switch ($this->Nb) {
case 4:
case 5:
case 6:
$this->c = array(0, 1, 2, 3);
break;
case 7:
$this->c = array(0, 1, 2, 4);
break;
case 8:
$this->c = array(0, 1, 3, 4);
}
$key = $this->key;
$w = array_values(unpack('N*words', $key));
$length = $this->Nb * ($this->Nr + 1);
for ($i = $this->Nk; $i < $length; $i++) {
$temp = $w[$i - 1];
if ($i % $this->Nk == 0) {
// according to <http://php.net/language.types.integer>, "the size of an integer is platform-dependent".
// on a 32-bit machine, it's 32-bits, and on a 64-bit machine, it's 64-bits. on a 32-bit machine,
// 0xFFFFFFFF << 8 == 0xFFFFFF00, but on a 64-bit machine, it equals 0xFFFFFFFF00. as such, doing 'and'
// with 0xFFFFFFFF (or 0xFFFFFF00) on a 32-bit machine is unnecessary, but on a 64-bit machine, it is.
$temp = (($temp << 8) & 0xFFFFFF00) | (($temp >> 24) & 0x000000FF); // rotWord
$temp = $this->_subWord($temp) ^ $rcon[$i / $this->Nk];
} else if ($this->Nk > 6 && $i % $this->Nk == 4) {
$temp = $this->_subWord($temp);
}
$w[$i] = $w[$i - $this->Nk] ^ $temp;
}
// convert the key schedule from a vector of $Nb * ($Nr + 1) length to a matrix with $Nr + 1 rows and $Nb columns
// and generate the inverse key schedule. more specifically,
// according to <http://csrc.nist.gov/archive/aes/rijndael/Rijndael-ammended.pdf#page=23> (section 5.3.3),
// "The key expansion for the Inverse Cipher is defined as follows:
// 1. Apply the Key Expansion.
// 2. Apply InvMixColumn to all Round Keys except the first and the last one."
// also, see fips-197.pdf#page=27, "5.3.5 Equivalent Inverse Cipher"
$temp = array();
for ($i = $row = $col = 0; $i < $length; $i++, $col++) {
if ($col == $this->Nb) {
if ($row == 0) {
$this->dw[0] = $this->w[0];
} else {
// subWord + invMixColumn + invSubWord = invMixColumn
$j = 0;
while ($j < $this->Nb) {
$dw = $this->_subWord($this->w[$row][$j]);
$temp[$j] = $this->dt0[$dw & 0xFF000000] ^
$this->dt1[$dw & 0x00FF0000] ^
$this->dt2[$dw & 0x0000FF00] ^
$this->dt3[$dw & 0x000000FF];
$j++;
}
$this->dw[$row] = $temp;
}
$col = 0;
$row++;
}
$this->w[$row][$col] = $w[$i];
}
$this->dw[$row] = $this->w[$row];
$this->changed = false;
}
/**
* Performs S-Box substitutions
*
* @access private
*/
function _subWord($word)
{
static $sbox0, $sbox1, $sbox2, $sbox3;
if (empty($sbox0)) {
$sbox0 = array(
0x63, 0x7C, 0x77, 0x7B, 0xF2, 0x6B, 0x6F, 0xC5, 0x30, 0x01, 0x67, 0x2B, 0xFE, 0xD7, 0xAB, 0x76,
0xCA, 0x82, 0xC9, 0x7D, 0xFA, 0x59, 0x47, 0xF0, 0xAD, 0xD4, 0xA2, 0xAF, 0x9C, 0xA4, 0x72, 0xC0,
0xB7, 0xFD, 0x93, 0x26, 0x36, 0x3F, 0xF7, 0xCC, 0x34, 0xA5, 0xE5, 0xF1, 0x71, 0xD8, 0x31, 0x15,
0x04, 0xC7, 0x23, 0xC3, 0x18, 0x96, 0x05, 0x9A, 0x07, 0x12, 0x80, 0xE2, 0xEB, 0x27, 0xB2, 0x75,
0x09, 0x83, 0x2C, 0x1A, 0x1B, 0x6E, 0x5A, 0xA0, 0x52, 0x3B, 0xD6, 0xB3, 0x29, 0xE3, 0x2F, 0x84,
0x53, 0xD1, 0x00, 0xED, 0x20, 0xFC, 0xB1, 0x5B, 0x6A, 0xCB, 0xBE, 0x39, 0x4A, 0x4C, 0x58, 0xCF,
0xD0, 0xEF, 0xAA, 0xFB, 0x43, 0x4D, 0x33, 0x85, 0x45, 0xF9, 0x02, 0x7F, 0x50, 0x3C, 0x9F, 0xA8,
0x51, 0xA3, 0x40, 0x8F, 0x92, 0x9D, 0x38, 0xF5, 0xBC, 0xB6, 0xDA, 0x21, 0x10, 0xFF, 0xF3, 0xD2,
0xCD, 0x0C, 0x13, 0xEC, 0x5F, 0x97, 0x44, 0x17, 0xC4, 0xA7, 0x7E, 0x3D, 0x64, 0x5D, 0x19, 0x73,
0x60, 0x81, 0x4F, 0xDC, 0x22, 0x2A, 0x90, 0x88, 0x46, 0xEE, 0xB8, 0x14, 0xDE, 0x5E, 0x0B, 0xDB,
0xE0, 0x32, 0x3A, 0x0A, 0x49, 0x06, 0x24, 0x5C, 0xC2, 0xD3, 0xAC, 0x62, 0x91, 0x95, 0xE4, 0x79,
0xE7, 0xC8, 0x37, 0x6D, 0x8D, 0xD5, 0x4E, 0xA9, 0x6C, 0x56, 0xF4, 0xEA, 0x65, 0x7A, 0xAE, 0x08,
0xBA, 0x78, 0x25, 0x2E, 0x1C, 0xA6, 0xB4, 0xC6, 0xE8, 0xDD, 0x74, 0x1F, 0x4B, 0xBD, 0x8B, 0x8A,
0x70, 0x3E, 0xB5, 0x66, 0x48, 0x03, 0xF6, 0x0E, 0x61, 0x35, 0x57, 0xB9, 0x86, 0xC1, 0x1D, 0x9E,
0xE1, 0xF8, 0x98, 0x11, 0x69, 0xD9, 0x8E, 0x94, 0x9B, 0x1E, 0x87, 0xE9, 0xCE, 0x55, 0x28, 0xDF,
0x8C, 0xA1, 0x89, 0x0D, 0xBF, 0xE6, 0x42, 0x68, 0x41, 0x99, 0x2D, 0x0F, 0xB0, 0x54, 0xBB, 0x16
);
$sbox1 = array();
$sbox2 = array();
$sbox3 = array();
for ($i = 0; $i < 256; $i++) {
$sbox1[$i << 8] = $sbox0[$i] << 8;
$sbox2[$i << 16] = $sbox0[$i] << 16;
$sbox3[$i << 24] = $sbox0[$i] << 24;
}
}
return $sbox0[$word & 0x000000FF] |
$sbox1[$word & 0x0000FF00] |
$sbox2[$word & 0x00FF0000] |
$sbox3[$word & 0xFF000000];
}
/**
* Performs inverse S-Box substitutions
*
* @access private
*/
function _invSubWord($word)
{
static $sbox0, $sbox1, $sbox2, $sbox3;
if (empty($sbox0)) {
$sbox0 = array(
0x52, 0x09, 0x6A, 0xD5, 0x30, 0x36, 0xA5, 0x38, 0xBF, 0x40, 0xA3, 0x9E, 0x81, 0xF3, 0xD7, 0xFB,
0x7C, 0xE3, 0x39, 0x82, 0x9B, 0x2F, 0xFF, 0x87, 0x34, 0x8E, 0x43, 0x44, 0xC4, 0xDE, 0xE9, 0xCB,
0x54, 0x7B, 0x94, 0x32, 0xA6, 0xC2, 0x23, 0x3D, 0xEE, 0x4C, 0x95, 0x0B, 0x42, 0xFA, 0xC3, 0x4E,
0x08, 0x2E, 0xA1, 0x66, 0x28, 0xD9, 0x24, 0xB2, 0x76, 0x5B, 0xA2, 0x49, 0x6D, 0x8B, 0xD1, 0x25,
0x72, 0xF8, 0xF6, 0x64, 0x86, 0x68, 0x98, 0x16, 0xD4, 0xA4, 0x5C, 0xCC, 0x5D, 0x65, 0xB6, 0x92,
0x6C, 0x70, 0x48, 0x50, 0xFD, 0xED, 0xB9, 0xDA, 0x5E, 0x15, 0x46, 0x57, 0xA7, 0x8D, 0x9D, 0x84,
0x90, 0xD8, 0xAB, 0x00, 0x8C, 0xBC, 0xD3, 0x0A, 0xF7, 0xE4, 0x58, 0x05, 0xB8, 0xB3, 0x45, 0x06,
0xD0, 0x2C, 0x1E, 0x8F, 0xCA, 0x3F, 0x0F, 0x02, 0xC1, 0xAF, 0xBD, 0x03, 0x01, 0x13, 0x8A, 0x6B,
0x3A, 0x91, 0x11, 0x41, 0x4F, 0x67, 0xDC, 0xEA, 0x97, 0xF2, 0xCF, 0xCE, 0xF0, 0xB4, 0xE6, 0x73,
0x96, 0xAC, 0x74, 0x22, 0xE7, 0xAD, 0x35, 0x85, 0xE2, 0xF9, 0x37, 0xE8, 0x1C, 0x75, 0xDF, 0x6E,
0x47, 0xF1, 0x1A, 0x71, 0x1D, 0x29, 0xC5, 0x89, 0x6F, 0xB7, 0x62, 0x0E, 0xAA, 0x18, 0xBE, 0x1B,
0xFC, 0x56, 0x3E, 0x4B, 0xC6, 0xD2, 0x79, 0x20, 0x9A, 0xDB, 0xC0, 0xFE, 0x78, 0xCD, 0x5A, 0xF4,
0x1F, 0xDD, 0xA8, 0x33, 0x88, 0x07, 0xC7, 0x31, 0xB1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xEC, 0x5F,
0x60, 0x51, 0x7F, 0xA9, 0x19, 0xB5, 0x4A, 0x0D, 0x2D, 0xE5, 0x7A, 0x9F, 0x93, 0xC9, 0x9C, 0xEF,
0xA0, 0xE0, 0x3B, 0x4D, 0xAE, 0x2A, 0xF5, 0xB0, 0xC8, 0xEB, 0xBB, 0x3C, 0x83, 0x53, 0x99, 0x61,
0x17, 0x2B, 0x04, 0x7E, 0xBA, 0x77, 0xD6, 0x26, 0xE1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0C, 0x7D
);
$sbox1 = array();
$sbox2 = array();
$sbox3 = array();
for ($i = 0; $i < 256; $i++) {
$sbox1[$i << 8] = $sbox0[$i] << 8;
$sbox2[$i << 16] = $sbox0[$i] << 16;
$sbox3[$i << 24] = $sbox0[$i] << 24;
}
}
return $sbox0[$word & 0x000000FF] |
$sbox1[$word & 0x0000FF00] |
$sbox2[$word & 0x00FF0000] |
$sbox3[$word & 0xFF000000];
}
/**
* Pad "packets".
*
* Rijndael works by encrypting between sixteen and thirty-two bytes at a time, provided that number is also a multiple
* of four. If you ever need to encrypt or decrypt something that isn't of the proper length, it becomes necessary to
* pad the input so that it is of the proper length.
*
* Padding is enabled by default. Sometimes, however, it is undesirable to pad strings. Such is the case in SSH,
* where "packets" are padded with random bytes before being encrypted. Unpad these packets and you risk stripping
* away characters that shouldn't be stripped away. (SSH knows how many bytes are added because the length is
* transmitted separately)
*
* @see Crypt_Rijndael::disablePadding()
* @access public
*/
function enablePadding()
{
$this->padding = true;
}
/**
* Do not pad packets.
*
* @see Crypt_Rijndael::enablePadding()
* @access public
*/
function disablePadding()
{
$this->padding = false;
}
/**
* Pads a string
*
* Pads a string using the RSA PKCS padding standards so that its length is a multiple of the blocksize.
* $block_size - (strlen($text) % $block_size) bytes are added, each of which is equal to
* chr($block_size - (strlen($text) % $block_size)
*
* If padding is disabled and $text is not a multiple of the blocksize, the string will be padded regardless
* and padding will, hence forth, be enabled.
*
* @see Crypt_Rijndael::_unpad()
* @access private
*/
function _pad($text)
{
$length = strlen($text);
if (!$this->padding) {
if ($length % $this->block_size == 0) {
return $text;
} else {
user_error("The plaintext's length ($length) is not a multiple of the block size ({$this->block_size})", E_USER_NOTICE);
$this->padding = true;
}
}
$pad = $this->block_size - ($length % $this->block_size);
return str_pad($text, $length + $pad, chr($pad));
}
/**
* Unpads a string.
*
* If padding is enabled and the reported padding length is invalid the encryption key will be assumed to be wrong
* and false will be returned.
*
* @see Crypt_Rijndael::_pad()
* @access private
*/
function _unpad($text)
{
if (!$this->padding) {
return $text;
}
$length = ord($text[strlen($text) - 1]);
if (!$length || $length > $this->block_size) {
return false;
}
return substr($text, 0, -$length);
}
/**
* Treat consecutive "packets" as if they are a continuous buffer.
*
* Say you have a 32-byte plaintext $plaintext. Using the default behavior, the two following code snippets
* will yield different outputs:
*
* <code>
* echo $rijndael->encrypt(substr($plaintext, 0, 16));
* echo $rijndael->encrypt(substr($plaintext, 16, 16));
* </code>
* <code>
* echo $rijndael->encrypt($plaintext);
* </code>
*
* The solution is to enable the continuous buffer. Although this will resolve the above discrepancy, it creates
* another, as demonstrated with the following:
*
* <code>
* $rijndael->encrypt(substr($plaintext, 0, 16));
* echo $rijndael->decrypt($des->encrypt(substr($plaintext, 16, 16)));
* </code>
* <code>
* echo $rijndael->decrypt($des->encrypt(substr($plaintext, 16, 16)));
* </code>
*
* With the continuous buffer disabled, these would yield the same output. With it enabled, they yield different
* outputs. The reason is due to the fact that the initialization vector's change after every encryption /
* decryption round when the continuous buffer is enabled. When it's disabled, they remain constant.
*
* Put another way, when the continuous buffer is enabled, the state of the Crypt_Rijndael() object changes after each
* encryption / decryption round, whereas otherwise, it'd remain constant. For this reason, it's recommended that
* continuous buffers not be used. They do offer better security and are, in fact, sometimes required (SSH uses them),
* however, they are also less intuitive and more likely to cause you problems.
*
* @see Crypt_Rijndael::disableContinuousBuffer()
* @access public
*/
function enableContinuousBuffer()
{
$this->continuousBuffer = true;
}
/**
* Treat consecutive packets as if they are a discontinuous buffer.
*
* The default behavior.
*
* @see Crypt_Rijndael::enableContinuousBuffer()
* @access public
*/
function disableContinuousBuffer()
{
$this->continuousBuffer = false;
$this->encryptIV = $this->iv;
$this->decryptIV = $this->iv;
}
/**
* String Shift
*
* Inspired by array_shift
*
* @param String $string
* @param optional Integer $index
* @return String
* @access private
*/
function _string_shift(&$string, $index = 1)
{
$substr = substr($string, 0, $index);
$string = substr($string, $index);
return $substr;
}
}
// vim: ts=4:sw=4:et:
// vim6: fdl=1:
?>